robzilla69

hi i just bought an 03 c230 komp and i dont have an owners manual, so I have no idea how to program my homelink. Can anyone help?

e1000

go to mbusa and sign up using your VIN, it will give you a downloadable manual

amdeutsch

What applies to your MY06 doesn't necessarily apply to his MY03.

e1000

I coulda swore they had downloadable manuals for 03. - my bad

mbz4810

Still you can register at MBUSA and get the instruction for homelink programming..... and some other "common" instruction.

Gilgorm

From 02 coupe manual:
"Programming or reprogramming the integrated remote control:
1. Turn electronic key in starter switch to position 1 or 2.
2. Hold the end of the hand-held transmitter of the device you wish to train approximately 2 to 5 inches away from the surface of the integrated remote control located on the inside rear view mirror, keeping the indicator lamp in view.
3. Using both hands, simultaneously push the hand-held transmitter button and the desired integrated remote control button. Do not release the buttons until completing step 4.
4. The indicator lamp on the integrated remote control will flash, first slowly and then rapidly. When the indicator lamp flashes rapidly, both buttons may be released (the rapid flashing lamp indicates successful programming of the new frequency signal). To program the remaining buttons follow steps 1 through 4."
"Erasing the remote control memory:
1. Turn electronic key in starter switch to position 1 or 2.
2. Simultaneously holding down the left and right side buttons for approximately 20 seconds, or until the control lamp blink rapidly, will erase the codes of all three channels."
Spelling error from manual.

Also, order a manual.
Hope this is what you are looking for.

robzilla69

that worked thanks!!