2ohm speakers
#1
MBWorld Fanatic!
Thread Starter
Join Date: Jun 2003
Location: Barcelona-Spain
Posts: 958
Likes: 0
Received 0 Likes
on
0 Posts
Brabus K3
2ohm speakers
Can I connect 2ohm speakers directly to comand headunit?
I know the comand outputs are 4 ohm, but what happens when I put 2 ohms speakers?
Best Regards.
60.7cs
Type: 6-1⁄2" 2-Way Component
Crossover Frequency: 3.5kHz
Woofer
Speaker Impedance: 2 ohms
Power Handling: 90W RMS, 270W Peak
Sensitivity: 95dB @ 2.83V, 1m
Frequency Response: 45Hz – 25kHz
Mounting Depth: 2-3⁄ 16" (56mm)
Cutout Diameter: 5" (127mm)
Tweeter
Speaker Impedance: 2 ohms
Power Handling: 50W RMS, 150W Peak
Sensitivity: 94dB @ 2.83V, 1m
Frequency Response: 3.5kHz – 25kHz
Mounting Depth: 3/4" (19mm)
Cutout Diameter: 1-7/8" (48mm)
I know the comand outputs are 4 ohm, but what happens when I put 2 ohms speakers?
Best Regards.
60.7cs
Type: 6-1⁄2" 2-Way Component
Crossover Frequency: 3.5kHz
Woofer
Speaker Impedance: 2 ohms
Power Handling: 90W RMS, 270W Peak
Sensitivity: 95dB @ 2.83V, 1m
Frequency Response: 45Hz – 25kHz
Mounting Depth: 2-3⁄ 16" (56mm)
Cutout Diameter: 5" (127mm)
Tweeter
Speaker Impedance: 2 ohms
Power Handling: 50W RMS, 150W Peak
Sensitivity: 94dB @ 2.83V, 1m
Frequency Response: 3.5kHz – 25kHz
Mounting Depth: 3/4" (19mm)
Cutout Diameter: 1-7/8" (48mm)