CoupeCrazy03 Photoshoot =)
#452
MBWorld Fanatic!
Thread Starter
Join Date: Jul 2007
Location: San Diego, California
Posts: 1,091
Likes: 0
Received 0 Likes
on
0 Posts
2003 C230 Kompressor Coupe, 2003 E320, 2003 Chevy Corvette Z06
Look at what I made Thanks to Jon from SD Tint for the idea The rig is sick and only cost me 5 bucks
What you will need:
3/4" PVC pipe
2 U-Bolts
4 Wingnuts
1 1/4"-20 screw (to mount camera)
1 1/4" nut
Mark holes where U-bolts will clamp around your headrests, then drill. Drill mount bolt hole when pipe is clamped into headrest save you the hassle of trying to get the camera straight. Then paint it or whatever to make it look clean
What you will need:
3/4" PVC pipe
2 U-Bolts
4 Wingnuts
1 1/4"-20 screw (to mount camera)
1 1/4" nut
Mark holes where U-bolts will clamp around your headrests, then drill. Drill mount bolt hole when pipe is clamped into headrest save you the hassle of trying to get the camera straight. Then paint it or whatever to make it look clean
#453
MBWorld Fanatic!
Thread Starter
Join Date: Jul 2007
Location: San Diego, California
Posts: 1,091
Likes: 0
Received 0 Likes
on
0 Posts
2003 C230 Kompressor Coupe, 2003 E320, 2003 Chevy Corvette Z06
LATEST MOD ! ! !
POWERCHIP ! ! !
The car is uber times better It was tuned to all my mods so I definitely feel the the effects of the header back system I got Tons more torque, no exact number but I would now like to to dyno it to see the numbers. The final drive feels like it was tweaked a bit because my gears seem to be a hell of a lot longer than they were before. The car pulls much harder and pulls constant throughout the power band which is what ive always wanted out of this car Overall I am a very satisfied customer with Powerchip Its still adapting so I gotta drive it around some more but right now I am very pleased with the results
POWERCHIP ! ! !
The car is uber times better It was tuned to all my mods so I definitely feel the the effects of the header back system I got Tons more torque, no exact number but I would now like to to dyno it to see the numbers. The final drive feels like it was tweaked a bit because my gears seem to be a hell of a lot longer than they were before. The car pulls much harder and pulls constant throughout the power band which is what ive always wanted out of this car Overall I am a very satisfied customer with Powerchip Its still adapting so I gotta drive it around some more but right now I am very pleased with the results
#455
MBWorld Fanatic!
LATEST MOD ! ! !
POWERCHIP ! ! !
The car is uber times better It was tuned to all my mods so I definitely feel the the effects of the header back system I got Tons more torque, no exact number but I would now like to to dyno it to see the numbers. The final drive feels like it was tweaked a bit because my gears seem to be a hell of a lot longer than they were before. The car pulls much harder and pulls constant throughout the power band which is what ive always wanted out of this car Overall I am a very satisfied customer with Powerchip Its still adapting so I gotta drive it around some more but right now I am very pleased with the results
POWERCHIP ! ! !
The car is uber times better It was tuned to all my mods so I definitely feel the the effects of the header back system I got Tons more torque, no exact number but I would now like to to dyno it to see the numbers. The final drive feels like it was tweaked a bit because my gears seem to be a hell of a lot longer than they were before. The car pulls much harder and pulls constant throughout the power band which is what ive always wanted out of this car Overall I am a very satisfied customer with Powerchip Its still adapting so I gotta drive it around some more but right now I am very pleased with the results
anyway that they work remotely?
since we both have headers, exhaust and sprintbooster on our manual 2003's... maybe i can get the same tuning that you have... hmmm
edit: their website says:
"In standard form, the C230K Sport Coupe 1.8 produces 253 hp and 139 lb.-ft.
Powerchip has a range of chips to suit your car, which can increase it's power to between 273 hp and 278 hp, and it's torque to between 150 lb.-ft and 152 lb.-ft."
that doesn't sound right
Last edited by Midnight Koop; 08-26-2010 at 09:51 PM.
#456
MBWorld Fanatic!
Thread Starter
Join Date: Jul 2007
Location: San Diego, California
Posts: 1,091
Likes: 0
Received 0 Likes
on
0 Posts
2003 C230 Kompressor Coupe, 2003 E320, 2003 Chevy Corvette Z06
did you get this done in person?
anyway that they work remotely?
since we both have headers, exhaust and sprintbooster on our manual 2003's... maybe i can get the same tuning that you have... hmmm
edit: their website says:
"In standard form, the C230K Sport Coupe 1.8 produces 253 hp and 139 lb.-ft.
Powerchip has a range of chips to suit your car, which can increase it's power to between 273 hp and 278 hp, and it's torque to between 150 lb.-ft and 152 lb.-ft."
that doesn't sound right
anyway that they work remotely?
since we both have headers, exhaust and sprintbooster on our manual 2003's... maybe i can get the same tuning that you have... hmmm
edit: their website says:
"In standard form, the C230K Sport Coupe 1.8 produces 253 hp and 139 lb.-ft.
Powerchip has a range of chips to suit your car, which can increase it's power to between 273 hp and 278 hp, and it's torque to between 150 lb.-ft and 152 lb.-ft."
that doesn't sound right
#457
MBWorld Fanatic!
Thread Starter
Join Date: Jul 2007
Location: San Diego, California
Posts: 1,091
Likes: 0
Received 0 Likes
on
0 Posts
2003 C230 Kompressor Coupe, 2003 E320, 2003 Chevy Corvette Z06
#458
MBWorld Fanatic!
I think those numbers are if you were to set the engine to conform with 93 octane as opposed to 91. I really want to dyno and see the numbers on paper, but for sure there has been vast improvement in performance for sure when driving it Especially with the headers, the numbers should be much greater than with a m271 without the headers with this tune. The shop I took it too removed the ecu and sent it to Powerchip and there they tuned it according to the list of mods I gave them. So they set the fuel ratio accordingly to run a little more rich (I was running a little too lean to run efficiently )
#463
MBWorld Fanatic!
Thread Starter
Join Date: Jul 2007
Location: San Diego, California
Posts: 1,091
Likes: 0
Received 0 Likes
on
0 Posts
2003 C230 Kompressor Coupe, 2003 E320, 2003 Chevy Corvette Z06
Oh I do Tommy
and super easy to make and it works
#464
MBWorld Fanatic!
Thread Starter
Join Date: Jul 2007
Location: San Diego, California
Posts: 1,091
Likes: 0
Received 0 Likes
on
0 Posts
2003 C230 Kompressor Coupe, 2003 E320, 2003 Chevy Corvette Z06
Made a template for a splitter I wanna make outta ABS plastic.
Template isnt absolutely perfect but you get the idea
Let me know whatcha think
Template isnt absolutely perfect but you get the idea
Let me know whatcha think
#467
MBWorld Fanatic!
Thread Starter
Join Date: Jul 2007
Location: San Diego, California
Posts: 1,091
Likes: 0
Received 0 Likes
on
0 Posts
2003 C230 Kompressor Coupe, 2003 E320, 2003 Chevy Corvette Z06
Thanks again to SDTint/SDmotorsports I got a new mod done! Lexan splitter, the quality and craftsmanship is just awesome :drool: Here are some quick phone pics, just washed the car so I hope to shoot some better pictures soon.
#470
MBWorld Fanatic!
looks great... did you ever consider continuing the look on the sideskirts, etc...
http://www.germancarblog.com/2008/03...in-detail.html
http://www.germancarblog.com/2008/03...in-detail.html
#471
MBWorld Fanatic!
Thread Starter
Join Date: Jul 2007
Location: San Diego, California
Posts: 1,091
Likes: 0
Received 0 Likes
on
0 Posts
2003 C230 Kompressor Coupe, 2003 E320, 2003 Chevy Corvette Z06
looks great... did you ever consider continuing the look on the sideskirts, etc...
http://www.germancarblog.com/2008/03...in-detail.html
http://www.germancarblog.com/2008/03...in-detail.html
#472
MBWorld Fanatic!
Thread Starter
Join Date: Jul 2007
Location: San Diego, California
Posts: 1,091
Likes: 0
Received 0 Likes
on
0 Posts
2003 C230 Kompressor Coupe, 2003 E320, 2003 Chevy Corvette Z06
#473
MBWorld Fanatic!
Thread Starter
Join Date: Jul 2007
Location: San Diego, California
Posts: 1,091
Likes: 0
Received 0 Likes
on
0 Posts
2003 C230 Kompressor Coupe, 2003 E320, 2003 Chevy Corvette Z06
Picked up some authentic CLK 5 spoke AMG wheels in 17x7.5 ET 35 front and 17x8.5 ET30 in the rear from SD202 Rattle canned them my self Semi gloss black :clap: Knight Rider status for sure :drive: Still waiting for the paint to cure/dry so ill wait to install em but here are some Samsung vibrant pics.
AMG Valve stem covers
Knight Rider
DIY FTW
AMG Valve stem covers
Knight Rider
DIY FTW
#475
MBWorld Fanatic!
Thread Starter
Join Date: Jul 2007
Location: San Diego, California
Posts: 1,091
Likes: 0
Received 0 Likes
on
0 Posts
2003 C230 Kompressor Coupe, 2003 E320, 2003 Chevy Corvette Z06