Question with capactior i bought with HID kit
Thread Starter
Senior Member
Joined: Oct 2007
Posts: 260
Likes: 0
From: Los Angeles
05 C230 Kompressor
Question with capactior i bought with HID kit
Hey all. I have a question. I ordered and HID kit from www.cqlight.ca (2nd kit, first was for my Mustang). They included capacitors but i am clueless as to where to connect the other end (sort of looks like bronze flat connectors that dont have a plug and play head. The other end goes to one of the two wires that come from the Ballast. Any idea where i can connect it to? If the extra wire (capacitor wire) wasn't there, it would connect to the stock headlight harness (like on my mustang). Here's a few pics. Can anyone help where to put these two or where to connect, or better yet, what to do with them. They are a negative and positive wire connectors.
Thanks for your inputs yall.
Thanks for your inputs yall.
Thread Starter
Senior Member
Joined: Oct 2007
Posts: 260
Likes: 0
From: Los Angeles
05 C230 Kompressor
Does it require further modification? Or is it just "plug and play"? Trust me when i say this, i am completely clueless on what to do. lol
I would need links part numbers or pictures if anything. Thanks man
I would need links part numbers or pictures if anything. Thanks man
Thread Starter
Senior Member
Joined: Oct 2007
Posts: 260
Likes: 0
From: Los Angeles
05 C230 Kompressor
Oh, upon further inspection and common sense in my head, do those two wires connect in the place of the halogen bulb was?
There is a black and a brown wire on the stock harness, where do i plug in the negative and the positive?
Thanks!
There is a black and a brown wire on the stock harness, where do i plug in the negative and the positive?
Thanks!
