Ceramic Brake Pads for '05 C230 Sport
03-18-2008, 11:00 AM
#1
Newbie
Thread Starter
Join Date: Mar 2008
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
c230
Ceramic Brake Pads for '05 C230 Sport
i recently ordered a set of Friction Master (by Morse) ceramic brake pads for my '05 C230 sport. i bought the CMX872 based on posts i read here, but they do not fit. so, by process of elimination, i'm figuring that i need the CMX1121, but i can't find them anywhere in stock online. i've tried parts america and advance among others. i've also emailed morse, but they've been slow to respond. does anyone have any suggestions on where to buy these pads, or something comparable?
i really like the idea of spending less than $60 to get the brake dust out of my life. any help would be greatly appreciated!
i really like the idea of spending less than $60 to get the brake dust out of my life. any help would be greatly appreciated!
03-18-2008, 12:55 PM
#2
Member
Join Date: Aug 2004
Location: little ferry nj
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
08 Silver Lexus IS250 (manual),73 air cooled super beetle-- black 2004 230 ss is gone
There's a thread about these.Do a search. I bought mine from Auto Zone. Took about 3 days to get them. The pads you bought are for C240 & pre-facelift C230K's I did mine fronts about 3 weeks ago & am very happy with them and the front wheels are no dirtier than the backs now. They were less than $40 from Auto Zone and are under the Morse brand name
Last edited by johnp; 03-18-2008 at 12:57 PM.
03-24-2008, 12:34 PM
#3
Newbie
Thread Starter
Join Date: Mar 2008
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
c230
Brake wear notification reset?
ok, so i got the pads (CMX1121 is the correct part number for '05 c230 sport) from advance and had them installed at the gas station across the street from my work. they seem to work fine, but i'm still getting the brake wear notice from the computer when i start the car.
i'm worried this may be an indication that they didn't install the sensor properly.
any advice on how i should handle this? should i take it back to the garage and ask them to check the sensor? or is there a simpler reset option that i should be looking in to?
i'm worried this may be an indication that they didn't install the sensor properly.
any advice on how i should handle this? should i take it back to the garage and ask them to check the sensor? or is there a simpler reset option that i should be looking in to?
03-24-2008, 12:56 PM
#4
Out Of Control!!
Join Date: Nov 2005
Location: OC
Posts: 18,677
Likes: 0
Received 9 Likes
on
9 Posts
a quarter mile at a time
ok, so i got the pads (CMX1121 is the correct part number for '05 c230 sport) from advance and had them installed at the gas station across the street from my work. they seem to work fine, but i'm still getting the brake wear notice from the computer when i start the car.
i'm worried this may be an indication that they didn't install the sensor properly.
any advice on how i should handle this? should i take it back to the garage and ask them to check the sensor? or is there a simpler reset option that i should be looking in to?
i'm worried this may be an indication that they didn't install the sensor properly.
any advice on how i should handle this? should i take it back to the garage and ask them to check the sensor? or is there a simpler reset option that i should be looking in to?
