C-Class (W203) 2001-2007, C160, C180, C200, C220, C230, C240, C270, C280, C300, C320, C230K, C350, Coupe

Don Nguyen | **Vinyl Roof Wrapping Services + Stickers/Graphics and more!**

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 12-08-2010, 02:16 PM
  #151  
Former Vendor of MBWorld
Thread Starter
 
Don Nguyen's Avatar
 
Join Date: Mar 2008
Location: Irvine, CA
Posts: 19,593
Likes: 0
Received 30 Likes on 26 Posts
Euros
Here are some of the pictures of the tail lights that I vinyled over this weekend. Smoked/tinted the entire tail light on this BMW E60 535i. Yes, it is a film that I use, not spray/paint/etc.









-Don

donathon@gmail.com
Old 12-10-2010, 03:44 PM
  #152  
Former Vendor of MBWorld
Thread Starter
 
Don Nguyen's Avatar
 
Join Date: Mar 2008
Location: Irvine, CA
Posts: 19,593
Likes: 0
Received 30 Likes on 26 Posts
Euros
Here are pictures of the tail lights that I tinted with a red vinyl film for on this Subaru WRX. I cut out the reverse/turn light pieces for him as well.

For those who don't know what these tails looked like before I tinted it, here's a stock picture for reference.

Before:



After:







-Don

donathon@gmail.com
Old 12-11-2010, 01:46 PM
  #153  
Former Vendor of MBWorld
Thread Starter
 
Don Nguyen's Avatar
 
Join Date: Mar 2008
Location: Irvine, CA
Posts: 19,593
Likes: 0
Received 30 Likes on 26 Posts
Euros
Blacked out the window trim on this E60 5 series with some matte black vinyl. They were originally chrome, and the owner wanted to get rid of them, to go with a more blacked out/murdered out look for his car. Everything is done in one piece, no seam lines anywhere, even on the rear doors where it curves downwards.

I forgot to take some before/after pictures, until I was half way done, so here's the best I have of a comparison of the chrome (bottom trim) compared to the trim that I wrapped (top trim) already in matte black.





Finished result:





-Don

donathon@gmail.com
Old 12-13-2010, 04:12 PM
  #154  
Former Vendor of MBWorld
Thread Starter
 
Don Nguyen's Avatar
 
Join Date: Mar 2008
Location: Irvine, CA
Posts: 19,593
Likes: 0
Received 30 Likes on 26 Posts
Euros
Been doing quite a few tail lights. Here are some pictures of the tails that I tinted/smoked with a vinyl/film on this BMW E60 5 series.







-Don

donathon@gmail.com
Old 12-15-2010, 08:39 PM
  #155  
MBWorld Fanatic!
 
LorinserCClass's Avatar
 
Join Date: Nov 2002
Location: El Pueblo de la Reyna de los Angeles
Posts: 4,604
Likes: 0
Received 0 Likes on 0 Posts
The True OG Modded out W203
Don, I inquired about a roof on an A5 before but I painted instead. I would actually rather not paint my window sills since I want to try flat black. Can you get me a quote? I might be down in the OC area friday picking up my new DPE wheels. Hopefully we can arrange something soon. Thanks Don.
Old 12-16-2010, 04:35 PM
  #156  
Former Vendor of MBWorld
Thread Starter
 
Don Nguyen's Avatar
 
Join Date: Mar 2008
Location: Irvine, CA
Posts: 19,593
Likes: 0
Received 30 Likes on 26 Posts
Euros
Another fellow Orange County member on another forum that I am on came by with his white E60 BMW M5 to have his roof vinyl wrapped with the 3M di noc carbon fiber.

Here are some pictures that I took of it. Let me know what you guys think.

















-Don

donathon@gmail.com
Old 12-18-2010, 02:32 PM
  #157  
Super Member
 
nrg_mike's Avatar
 
Join Date: Feb 2010
Location: Los Angeles, CA
Posts: 732
Likes: 0
Received 0 Likes on 0 Posts
2005 C320 Sport, 2010 C300 Sport
Hey don, wanna wrap my snowboard helmet? LOL
Old 12-18-2010, 02:42 PM
  #158  
Former Vendor of MBWorld
Thread Starter
 
Don Nguyen's Avatar
 
Join Date: Mar 2008
Location: Irvine, CA
Posts: 19,593
Likes: 0
Received 30 Likes on 26 Posts
Euros
Not really, I think you're better of getting a new one or spray painting it, haha.

-Don
Old 12-18-2010, 03:22 PM
  #159  
Newbie
 
ramden's Avatar
 
Join Date: Oct 2010
Location: Belgium
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
'03 W203
Hi, do yo have alu brushed cast vinyl like hexis cast HX30000 hx30BASILB? would need a piece to wrap my centre console...hmm, but will be difficult to send...
Old 12-18-2010, 03:51 PM
  #160  
Former Vendor of MBWorld
Thread Starter
 
Don Nguyen's Avatar
 
Join Date: Mar 2008
Location: Irvine, CA
Posts: 19,593
Likes: 0
Received 30 Likes on 26 Posts
Euros
Sorry, I do not.

-Don
Old 12-18-2010, 04:49 PM
  #161  
Former Vendor of MBWorld
Thread Starter
 
Don Nguyen's Avatar
 
Join Date: Mar 2008
Location: Irvine, CA
Posts: 19,593
Likes: 0
Received 30 Likes on 26 Posts
Euros
I had a car come by (E92 BMW 3 series coupe), to have me vinyl wrap his window trim with black vinyl to cover the chrome/aluminum finish. He had done one side, but decided that he wanted me to finish/wrap his other side. He had originally purchased some "matte black" vinyl from another competing vendor.

Note the differences in the finish between my vinyl and my competitors vinyl, and how my material actually has a black sheen/finish to it compared to theirs, which is almost a faded black or greyish color (this was brand new material, that the owner had just purchased/put on a week before). Also note, I did not do the install on this side of the window trim, as I do all of my window trim installs in a single continuous piece, without any seams.

Luckily for the owner of this car, I have several shades of black that I keep on hand, and was able to match the material he had already used. This saved him from having two different shades on either side of the car, or having to completely redo the window trim that was already done.









-Don

donathon@gmail.com
Old 12-18-2010, 04:55 PM
  #162  
Banned
 
cpbeasley's Avatar
 
Join Date: Aug 2010
Location: KC, MO
Posts: 997
Likes: 0
Received 1 Like on 1 Post
"annoyance" and "self-righteousness", amoung others...
He should've had it redone. Looks like @$$.

I wish you were local Don. You're an artist.

Should I be able to approach any local auto vinyl, graphics, stickers person about having this sort of work done? Anything I should use as a judge before I opt for them to do the work?
Old 12-19-2010, 05:08 PM
  #163  
Former Vendor of MBWorld
Thread Starter
 
Don Nguyen's Avatar
 
Join Date: Mar 2008
Location: Irvine, CA
Posts: 19,593
Likes: 0
Received 30 Likes on 26 Posts
Euros
Haha, thanks.

I guess best way to determine if a shop is capable of doing it or not is to ask them for in person examples of their work if they have any. That's really the only way for a customer to gauge how well it is, for shops that aren't like me and have documented pictures of the cars they do work on.

-Don
Old 12-20-2010, 03:49 PM
  #164  
Former Vendor of MBWorld
Thread Starter
 
Don Nguyen's Avatar
 
Join Date: Mar 2008
Location: Irvine, CA
Posts: 19,593
Likes: 0
Received 30 Likes on 26 Posts
Euros
Although I vinyl/black out window trims fairly often, it's not too often/common that I have someone request or ask me to wrap their window trims in gloss black (instead of matte black).

So for those who are curious what it looks like, this is what a gloss black vinyl wrapped window trim looks like. Did this on an E46 BMW 325i black coupe. Owner drove from Fullerton/Orange County.











-Don

donathon@gmail.com
Old 12-22-2010, 02:38 PM
  #165  
Former Vendor of MBWorld
Thread Starter
 
Don Nguyen's Avatar
 
Join Date: Mar 2008
Location: Irvine, CA
Posts: 19,593
Likes: 0
Received 30 Likes on 26 Posts
Euros
Ran across pictures of this car that I did several months back. The owner of this car drove up from San Diego area, or around Carlsbad, to me in Orange County to have me vinyl wrap his roof in gloss black material. It is a Mercedes E55, and I think the color of the car is called pewter. I think the gloss roof and the color of the car went nicely together.









-Don

donathon@gmail.com
Old 12-27-2010, 02:14 PM
  #166  
Former Vendor of MBWorld
Thread Starter
 
Don Nguyen's Avatar
 
Join Date: Mar 2008
Location: Irvine, CA
Posts: 19,593
Likes: 0
Received 30 Likes on 26 Posts
Euros
Pictures of this silver 7th(?) gen Honda Accord that I vinyl wrapped the roof with in gloss black. Note his hood is real carbon fiber, so it's a good comparison for those who are trying to figure out what they want to go with, who have either a cf hood and or trunk. The owner of this car came from Pasadena out to me in Orange County to get it done.

Cool car, with mods/styles that you don't see anymore these days, like you did back around ~2000.









-Don

donathon@gmail.com
Old 12-29-2010, 10:44 PM
  #167  
Former Vendor of MBWorld
Thread Starter
 
Don Nguyen's Avatar
 
Join Date: Mar 2008
Location: Irvine, CA
Posts: 19,593
Likes: 0
Received 30 Likes on 26 Posts
Euros
Here are pictures of Joe @ Trinity's E60 M5 that I vinyl wrapped the roof with in the 3M di-noc carbon fiber material. A fellow Irvine/Orange County car, so he was right down the street from me, almost quite literally. Didn't have much room to take the pictures, but I tried doing what I could.













-Don

donathon@gmail.com
Old 12-31-2010, 01:48 PM
  #168  
Former Vendor of MBWorld
Thread Starter
 
Don Nguyen's Avatar
 
Join Date: Mar 2008
Location: Irvine, CA
Posts: 19,593
Likes: 0
Received 30 Likes on 26 Posts
Euros
Installed gloss black vinyl on this white IS300. Car was from Anaheim/Orange County. The car had a carbon fiber trunk that was tinted/painted lightly black, to give the weave a more subtle effect.

These pictures will show those of you who've asked how a black roof looks like with a roof spoiler that's not black and still left body colored.











-Don

donathon@gmail.com
Old 01-03-2011, 03:07 PM
  #169  
Former Vendor of MBWorld
Thread Starter
 
Don Nguyen's Avatar
 
Join Date: Mar 2008
Location: Irvine, CA
Posts: 19,593
Likes: 0
Received 30 Likes on 26 Posts
Euros
Here are some pictures of a white E92 BMW 335i that I vinyl wrapped the roof in gloss black vinyl. The car came up to me in Irvine from south orange county. Don't mind the antenna, I didn't put the antenna cover for it back on yet when I took these pictures.











-Don

donathon@gmail.com
Old 01-07-2011, 12:02 PM
  #170  
Former Vendor of MBWorld
Thread Starter
 
Don Nguyen's Avatar
 
Join Date: Mar 2008
Location: Irvine, CA
Posts: 19,593
Likes: 0
Received 30 Likes on 26 Posts
Euros
Here are pictures of tail lights that I tinted on a darker graphite colored C230 mercedes benz. The owner came from Glendale down to me in Orange County. I tinted the white turn signals on the tails, the turn signals on the side mirrors, and the amber reflector/light on the front bumper.











-Don

donathon@gmail.com
Old 01-11-2011, 01:43 PM
  #171  
Former Vendor of MBWorld
Thread Starter
 
Don Nguyen's Avatar
 
Join Date: Mar 2008
Location: Irvine, CA
Posts: 19,593
Likes: 0
Received 30 Likes on 26 Posts
Euros
Here are pictures of the tail lights on a black E60 BMW 535XI that I tinted/smoked with a vinyl/film. Pictures are with the parking lights on, to show you how much light still shows/shines through the material. Owner of the car drove out to me in Orange County to get it done. Let me know what you guys think.















-Don

donathon@gmail.com
Old 01-13-2011, 02:27 PM
  #172  
Former Vendor of MBWorld
Thread Starter
 
Don Nguyen's Avatar
 
Join Date: Mar 2008
Location: Irvine, CA
Posts: 19,593
Likes: 0
Received 30 Likes on 26 Posts
Euros
Here's a C300/C350 (don't remember which one it was exactly) that I did some tail light work on. I did a gloss black outline on his tail lights, similar to the tail lights that comes on the Brabus C classes. The owner of this car was from Long Beach, and I happened to be out in that area from Orange County, so I dropped by to do his tail lights for him. I also applied gloss black vinyl over his chrome rear trunk handle to add to the gloss/black theme.

Here's a stock photo of the tail light, to give a better side by side comparison of how it looked before/after.

Before:


After:










-Don

donathon@gmail.com
Old 01-13-2011, 02:58 PM
  #173  
MBWorld Fanatic!
 
mskembo's Avatar
 
Join Date: Sep 2010
Location: Salt Lake City, UT
Posts: 1,089
Received 6 Likes on 5 Posts
2010 Mercedes-Benz E350
Dude, you are keeping busy! Makes me wish I lived in Cali. Great work, especially that WRX, they look better than stock, but completely believable. Great job!
Old 01-15-2011, 02:01 PM
  #174  
Former Vendor of MBWorld
Thread Starter
 
Don Nguyen's Avatar
 
Join Date: Mar 2008
Location: Irvine, CA
Posts: 19,593
Likes: 0
Received 30 Likes on 26 Posts
Euros
Here are pictures of this white Nissan 350z that I vinyl wrapped his roof in gloss black. I think the owner of this car came up from San Diego to me in Orange County to have it done. The gloss black vinyl on his roof went well with his black face wheels and other black accents on the car, like the front lip/bumper.











-Don

donathon@gmail.com
Old 01-17-2011, 04:56 PM
  #175  
Former Vendor of MBWorld
Thread Starter
 
Don Nguyen's Avatar
 
Join Date: Mar 2008
Location: Irvine, CA
Posts: 19,593
Likes: 0
Received 30 Likes on 26 Posts
Euros
Some quick pictures of a BMW E60 530, I believe, that I vinyl wrapped (bmw shadowline) the chrome window trim on in a matte black finish. The owner of this car came out from Long Beach to me in Orange County to have it done. Everything was done seamlessly, even around the rear door's curves, just like all of my wraps.







-Don

donathon@gmail.com


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Don Nguyen | **Vinyl Roof Wrapping Services + Stickers/Graphics and more!**



All times are GMT -4. The time now is 07:23 PM.