DIY: M271 intake + Intercooler to TB pipe
#3
Senior Member
Thread Starter
Join Date: Sep 2008
Location: Bangkok, Thailand
Posts: 331
Likes: 0
Received 6 Likes
on
6 Posts
W124, W203, W204, W251
The intake probably not provide any gain...but the intercooler to TB pipe does!
I read somewhere in the UK forum. They dynoed about 3HP difference between OEM pipe and custom pipe.
I read somewhere in the UK forum. They dynoed about 3HP difference between OEM pipe and custom pipe.
#5
Senior Member
Thread Starter
Join Date: Sep 2008
Location: Bangkok, Thailand
Posts: 331
Likes: 0
Received 6 Likes
on
6 Posts
W124, W203, W204, W251
The tube is from W203 with M272 engine.
Intake adapter is from Home Depot...3" Polyethylene drain pipe adapter.
It's actually round, but flexible enough that I can squeeze it to the shape of the airbox.
And, I just wrapped it with 3M carbonfiber sticker.
Intake adapter is from Home Depot...3" Polyethylene drain pipe adapter.
It's actually round, but flexible enough that I can squeeze it to the shape of the airbox.
And, I just wrapped it with 3M carbonfiber sticker.
Trending Topics
#9
Member
Join Date: Jan 2010
Location: Oahu
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
'05 c230, '09 c300, '03 Durango
#10
Member
Join Date: Apr 2007
Location: Durham NC
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
2006 ML350 back from dealer after 4 weeks,now back for oil consumption test!,2003 C230 Sport
How much was the 272motor hose. I need an new one for my 03 c230. It about $60 at the dealership. I dont want to pay that much for an hose!
#16
Senior Member
I bought this HPS pipe and tried the install yesterday. I could not for the life of me get it to sit nicely!! Am I missing something? Did you attach the pipe to the coupler at the bottom or directly over the inlet? Help! lol
#19
Senior Member
I took off the custom pipe, put the stock back on but in the process i must have damaged the coupler b/c I am leaking air. You can hear the air escaping while hitting it. Basically i tried taking off the stock pipe from the coupler and then connecting the HPS pipe to the coupler and then to the supercharger inlet. I saw another post on here about a guy who took off the whole mechanism..... the piece under the coupler. This shouldnt be too hard but the leaking is scary, Im so slow now!
#24
Senior Member
Thread Starter
Join Date: Sep 2008
Location: Bangkok, Thailand
Posts: 331
Likes: 0
Received 6 Likes
on
6 Posts
W124, W203, W204, W251
You have to take out these 2 screws first before you can fit the HPS pipe on...see picture!