TTR's '01 C240 - Angelina
#26
Junior Member
Join Date: Aug 2012
Location: Perth, Western Australia
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
W203 C200 Kompressor
you merc looks clean as simple mods are always the best.
btw how did you go about with that ezi lip im considering on getting just not sure of wat it will look like, and if you dont mind can you take a photo of wat it looks like from the bottom so i can see how you attached it to the bumper.
btw how did you go about with that ezi lip im considering on getting just not sure of wat it will look like, and if you dont mind can you take a photo of wat it looks like from the bottom so i can see how you attached it to the bumper.
#27
Super Member
Thread Starter
you merc looks clean as simple mods are always the best.
btw how did you go about with that ezi lip im considering on getting just not sure of wat it will look like, and if you dont mind can you take a photo of wat it looks like from the bottom so i can see how you attached it to the bumper.
btw how did you go about with that ezi lip im considering on getting just not sure of wat it will look like, and if you dont mind can you take a photo of wat it looks like from the bottom so i can see how you attached it to the bumper.
#28
MBWorld Fanatic!
Join Date: Feb 2009
Location: fort worth, tx
Posts: 5,054
Likes: 0
Received 10 Likes
on
8 Posts
06 C230 SS 6spd
once you lower it its going to get beat up pretty fast and look tore up. my friend has one on his TL and he keeps having to replace it every so many months. You can go to lowes and buy a 100ft roll for cheap of the same exact stuff. It just a garage liner.
#29
Super Member
Thread Starter
Ya I'm probably going to have to remove it once winter comes around, not gonna be fun plowing all that snow haha.
#31
Junior Member
Join Date: Aug 2012
Location: Perth, Western Australia
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
W203 C200 Kompressor
#32
Super Member
Thread Starter
Here's a shiity Instagram and iPhone picture of it. Gonna do a proper shoot with it later, maybe some time this weekend.
Definitely feels lower, no scrapes yet and I think I should be fine for winter since the front is still reasonably high. The rear however is tucked and has a bit of negative camber to it.
There's still a decent amount of gap at the front, but we'll see if it'll settle more. Either way, not gonna cut a coil or anything like that.
Definitely feels lower, no scrapes yet and I think I should be fine for winter since the front is still reasonably high. The rear however is tucked and has a bit of negative camber to it.
There's still a decent amount of gap at the front, but we'll see if it'll settle more. Either way, not gonna cut a coil or anything like that.
Last edited by TTR; 05-08-2013 at 11:14 AM.
#33
Super Member
Thread Starter
you merc looks clean as simple mods are always the best.
btw how did you go about with that ezi lip im considering on getting just not sure of wat it will look like, and if you dont mind can you take a photo of wat it looks like from the bottom so i can see how you attached it to the bumper.
btw how did you go about with that ezi lip im considering on getting just not sure of wat it will look like, and if you dont mind can you take a photo of wat it looks like from the bottom so i can see how you attached it to the bumper.
Close up of the front
Underside
Really you just stick it on, there's nothing else to it. Haven't experienced any tearing or damage to it yet after the lowering.
#37
Junior Member
Join Date: Aug 2012
Location: Perth, Western Australia
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
W203 C200 Kompressor
thanks for that azn your ride looks awsome rember the springs are still settling in and it will go a bit lower but not to much. looks very good
#38
Super Member
Thread Starter
#39
Super Member
Thread Starter
#40
Junior Member
Join Date: Aug 2012
Location: Perth, Western Australia
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
W203 C200 Kompressor
#41
Super Member
Thread Starter
Ya it's a flash tune from Eurocharged. It's only $299. There's a thread on here posted by them with the price and the gains. Mine will give me +17hp +15tq if I recall correctly.
#43
Junior Member
Join Date: Aug 2012
Location: Perth, Western Australia
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
W203 C200 Kompressor
#44
Super Member
Thread Starter
#48
Super Member
Thread Starter
Awww man. Got 13mm spacers for the rear with 40mm lugs. When I installed them it made a mad thunking sound, apparently the lugs are too long. Updates soon, took the lugs back to the supplier to have one of his guys grind it down.