So my drivers side front window switch/button broke off when I went to roll up the window. I guess I pulled up to hard on it. Pics Below....Can I just snap in a new button or do I need to replace the whole assembly? Luckily I was able to kinda set it in there so I could roll it up. It looks like the tab is completely broken off.

 

I'd try to carefully pry out the lower-left switch and swap it with the upper-left one...
They appear to be the same (?)
You have nothing to lose after all

My switch is also cracked (but left side) and on its way.

 

Unfortunately, sounds like you already know the answer to the question you've posed. Definitely buy it online; dealers completely hose you on the prices of those switch assemblies.

 

So I was able to superglue the piece that broke off and It snapped back in but I know its not gonna last. I'm not going to get the whole assembly if I don't have to. I guess a trip to the local pick and pull is next. I think I may try that VVF good Idea!

 

I got a good price at ecs tuning. I would check there as well. Good luck.

 

wvadam,

Thanks for the shout-out!

bigspender101,

We do indeed have the window switch panel for your car. If you are interested, you can get to it on our website by clicking HERE, or by clicking on the photo below.



If there is anything else I can help you out with, please feel free to post or send a PM!

 

I have this same problem well as the passenger window button is about to go. Glad to know that ECS has it covered. Is this an actual MB part?

 

Poppy1,

Yes, the window switch assembly posted above is a genuine Mercedes-Benz part.

 

Thanks ECS.

 

I found the chinese version for $38 a pop....

http://www.ebay.com/itm/Power-Master-Window-Switch-Console-for-Mercedes-W203-C-Class-C320-A203821067-/281270800372?pt=Motors_Car_Truck_Parts_Accessories&hash=item417d0bcff4&vxp=mtr
Any one used this.....

My pass side switch keeps popping out of the socket If I try to use the one click function...need to replace mine as well..

any input on the above....performance, quality and the lights on these chinese ones...

javvy

 

I need the coupe version.

 

Good find Javvy!
$40 looks much better than $120

A friend of mine bought a Chinese switch row for his 2002 Passat.
Apparently the quality of plastic is on par with the OEM. I felt little burrs on the buttons (probably left from the molding process), but he said it's similar to how the original ones felt.

 

C230 Sport Coup,

We have the coupe version of the switch group available on our site as well. This replacement switch assembly is a genuine Mercedes-Benz part, so you can be sure that it will fit and function just like the original.

If you are interested, you can get to it on our site by clicking HERE, or by clicking on the photo of the switch below.



If there is anything else I can help out with, please feel free to post or send a PM!

 

Purchased the Chinese switch for 38.99 free shipping from LA....will post updates when I install and have it in my hands.

Javvy

 

a good place to get parts is also from http://www.mymercedesparts.com or http://www.genuinemercedesparts.com

$105 for drivers side or $35 for passengers side from mymercedesparts here
a little more from genuinemercedes parts here
so may just need to weigh the shipping costs from everyone

It's best to put the actual part# from EPC into the website so that you know you get the right part

 

OK got the switch, Quality looks good....Do any one have a DIY link or video that I can follow to remove the old switch froim the door....juts dont want to experiment and brake some tabs etc.....any resource would be helpfull...hope I dont have to remove the complete door panel...

javvy

 

Here is a video about taking the door panel off. After that it should be pretty easy.

 

Yes, you do have to remove the panel. The switch is held on by the white tabs you can see on the sides of the switches pictured. To remove, slide them up (you can see the slots they go into pretty easily on the reverse of the door panel); to install, do the opposite, and don't forget to reattach the wiring to the new switches. You should be able to do all of this without having to mess with the door rod, which you don't want to have to remove; it's a bit tricky.

 

I think my drivers side is starting to go as well. It feels a bit flimsy, so I try to keep from putting too much pressure on it.

 

Javvy, could you post some pics of the switch? Thanks!

 

Paitence my young paduvan.......lolol

Will do a side by side onces I have the oem one out....lolol

Javvy

 

Ha, seems like somebody tries to make money on those switches: http://www.ebay.com/itm/01-07-MERCEDES-BENZ-C230-C240-C280-C320-MASTER-POWER-WINDOW-SWITCH-TESTED-/151351932165?_trksid=p2054897.l5661Also, the passenger window cut-off switch seems reversed (switch to the right to enable windows vs left for OEM) which is nothing

 

This update is especially for VVF, here you go side by side comparison.

The chinese master control door switch fit and finish is similar to OEM. The only difference is the image on the child lock button and the illumination light of the switch is slightly brighter than OEM. I like it though as it just states that it is the master control for all windows. Works perfect and has a longer harness. I would recommend it highly to all that want to replace theirs and save some $$$. Shipping was super-fast and am completely satisfied with my buy. If I have any reliability issues I will definitely report back to this thread. Some side by side comparison pictures attached.

Enjoy...

Javvy

 

More Pics...

 

Thanks anyway but it's only 70 bucks with free shipping from Mercedes