H&R sport springs on my 4matic, need camber adjustment bolts in front. Options?
Thread Starter
Member
Joined: Mar 2013
Posts: 200
Likes: 2
2007 c280
H&R sport springs on my 4matic, need camber adjustment bolts in front. Options?
I researched and researched before installing my H&R spring on my 07 c280 4matic but after an alignment yesterday was told that I need to pickup camber adjustment bolts only for the front of my car.
I remember threads about these bolts and that they were relatively cheap from the dealer but I can't seem to find the threads. From what I gathered these should not be needed for such a mild drop. I was under the impression that these were only needed for big drops/ coilovers.
What are my options here guys?
Thanks!
I believe I need 4 of this part number at $11 each. But this will only yield .5 a degree of camber adjustmant. Looking to confirm.
0003300108
OR
2 of these http://store.specprod.com/productdetail/M50/1/1/81260 for $44 but Ill get 1.75 degree adjustment.
Thoughts?
I remember threads about these bolts and that they were relatively cheap from the dealer but I can't seem to find the threads. From what I gathered these should not be needed for such a mild drop. I was under the impression that these were only needed for big drops/ coilovers.
What are my options here guys?
Thanks!
I believe I need 4 of this part number at $11 each. But this will only yield .5 a degree of camber adjustmant. Looking to confirm.
0003300108
OR
2 of these http://store.specprod.com/productdetail/M50/1/1/81260 for $44 but Ill get 1.75 degree adjustment.
Thoughts?
Last edited by Stuka Bomber; Jun 5, 2014 at 04:35 PM.
