Please Help P0010 & P0020 After timing chain replacement.
11-10-2016, 06:01 AM
#1
Newbie
Thread Starter
Join Date: Oct 2013
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
2006 C180K
Please Help P0010 & P0020 After timing chain replacement.
Good Day All,
I require some help please. I have a W203 2006 Class 6 Speed manual.
Of recent i have had the timing chain replaced together with
re-manufactured cam gears and cam magnets. The car runs fine but the engine light comes up (i feel no performance changes). Everytime the fault is cleard i drive for about 30km and the light comes up again.
The cars at the workshop and the diagnostics report the following:
2054-001- Continuous camshaft adjustment, Incorrect position of the intake camshaft [P0010].
2054-002-Continuous camshaft adjustment, Incorrect position of the exhaust camshaft [P0020].
2054-016- Continuous camshaft adjustment, Unknown fault type:16
2054-032- Continuous camshaft adjustment, Unknown fault type:32
2047-001- Secondary air injection: malfunction (function chain), Airflow is too low [P0410]
Please help me diagnose this fault.
Thanks in advance,
I require some help please. I have a W203 2006 Class 6 Speed manual.
Of recent i have had the timing chain replaced together with
re-manufactured cam gears and cam magnets. The car runs fine but the engine light comes up (i feel no performance changes). Everytime the fault is cleard i drive for about 30km and the light comes up again.
The cars at the workshop and the diagnostics report the following:
2054-001- Continuous camshaft adjustment, Incorrect position of the intake camshaft [P0010].
2054-002-Continuous camshaft adjustment, Incorrect position of the exhaust camshaft [P0020].
2054-016- Continuous camshaft adjustment, Unknown fault type:16
2054-032- Continuous camshaft adjustment, Unknown fault type:32
2047-001- Secondary air injection: malfunction (function chain), Airflow is too low [P0410]
Please help me diagnose this fault.
Thanks in advance,
