P0170 code - not your usual questions
Thread Starter
Newbie
Joined: Jun 2019
Posts: 9
Likes: 0
C200 K
P0170 code - not your usual questions
Hi,
I've been using the site a lot recently reading up on a P0170 error code I have on my 2005 C200 Kompressor. Loads of great posts which have pointed me in the right direction.
I've change the hose on top of the supercharger but also decided to change the hoses and valve under the supercharger that lead to the block.
In doing so I obviously had to take off the inlet manifold, and when I did I noticed that the seam on the inlet seemed to be opening up. Please see pictures attached.
The seam looks very suspicious to me and could well be the source of a vacuum leak. I've not had it pressure tested yet. Don't know where the marks on the manifold came from.
Is this a problem anyone else has had?
I've been using the site a lot recently reading up on a P0170 error code I have on my 2005 C200 Kompressor. Loads of great posts which have pointed me in the right direction.
I've change the hose on top of the supercharger but also decided to change the hoses and valve under the supercharger that lead to the block.
In doing so I obviously had to take off the inlet manifold, and when I did I noticed that the seam on the inlet seemed to be opening up. Please see pictures attached.
The seam looks very suspicious to me and could well be the source of a vacuum leak. I've not had it pressure tested yet. Don't know where the marks on the manifold came from.
Is this a problem anyone else has had?
Last edited by fuzzysi; Jun 10, 2019 at 04:02 PM. Reason: adding pictures
