c220 crank but wont start.is it the Crankshaft Position Sensor?
car is c220 w203 year 2000. came to start it a few days ago i can crank it but it wont start.fuel pump replaced about 2 years ago.i replaced the MAF sensor today just to make sure. everywhere i read it says CPS is the fault , i have no check engine light or ODB scanner fault codes , while scanner is connect i checked to see the RPM at the crank and its barely moved ,about 100 RPM. does all that mean i should replace CPS?
its very hard to reach i hope i won't do it for nothing .
TY
i must admit i don't even know where the spark plugs are or what ht lead is ,i do have the mercedes EWA software and every digram possible of the car .i know i have glow plugs which is also something that is new to me .i did go to the car and pulled the fuel pump relay.i have voltmeter but i need 12v battery to check it .will be very lucky if it is the problem as i can buy it for few euros.im trying to learn as i go already managed to fix some electrical problems in the past but this one might be to big for me .getting the car to a garage i can count on is very hard
I appreciate your help



