tail light bulb sizes




A P21W bulb is equivalent to a 1156 (1 base pin), not a 1157 (2 base pins). That may be the problem you're encountering.
Pop the bulb holder out and look at the metal plates. Not sure about your year, but on mine, the bulb sizes are engraved next to each hole. Also take a look at the markings on the bulbs you took out. For the bottom bulb in the tail light I think you're looking for a P21/4W bulb, which has 2 pins and also doubles as the rear fog.
If all else fails, there is also the manual, which can be found online.
Last edited by slammer111; Feb 20, 2021 at 04:17 AM.
A P21W bulb is equivalent to a 1156 (1 base pin), not a 1157 (2 base pins). That may be the problem you're encountering.
Pop the bulb holder out and look at the metal plates. Not sure about your year, but on mine, the bulb sizes are engraved next to each hole. Also take a look at the markings on the bulbs you took out. For the bottom bulb in the tail light I think you're looking for a P21/4W bulb, which has 2 pins and also doubles as the rear fog.
If all else fails, there is also the manual, which can be found online.




On that note, which products are you using for the other bulbs?
Last edited by slammer111; Feb 23, 2021 at 03:28 AM.
On that note, which products are you using for the other bulbs?
i used auxito led error free bulbs for everything. for the headlights and fog lights i used auxbeams rgb bulbs with decoders. but i cant for the life of me get the stupid rgb bulbs to link up by bluetooth to the app.


