Hydraulic hard line from clutch master cylinder to slave cylinder
Thread Starter
Member
Joined: Jan 2024
Posts: 149
Likes: 6
From: Carbondale Illinois
2002 mercedes c230 kompressor coupe (CL203)
Hydraulic hard line from clutch master cylinder to slave cylinder
I was taking out my transmission today to replace the clutch and ended up absolutely obliterating the hard line that comes through the engine bay to the soft hose that goes to the clutch slave, I cant find the part anywhere at all. Does anyone know of a part that will work and if not would it be feasible for me to bend a new line to replace it? if so id appreciate any sizes I need to know
Senior Member
Joined: Apr 2009
Posts: 317
Likes: 49
w203cl
Funny, I changed the fluid today and noticed that this hard line is pinched and I was thinking to get a new one also. What were the symptoms of the clutch why you decided to change it?
The connector to the rubber hose is heavily rusted is this line to get somewhere?
The connector to the rubber hose is heavily rusted is this line to get somewhere?
Thread Starter
Member
Joined: Jan 2024
Posts: 149
Likes: 6
From: Carbondale Illinois
2002 mercedes c230 kompressor coupe (CL203)
I cant find anything close for the life of me, mine was heavily corroded too. My clutch was just due for a change, its a wear item so thats too be expected but now Im having to run a new line from the master cylinder I guess. When I get it all out I'll have to take it too a hydraulics shop and get the right hardware to make a replacement
Senior Member
Joined: Apr 2009
Posts: 317
Likes: 49
w203cl
