nlpamg

This is my first time doing something like this... I'm trying to wire my Valentine 1 to my fuse box. From my research, I saw that I have to wire it to (supposedly empty) Fuse 7 in the fuse box in the trunk. My question is how do I do that? Do I have to buy a 2.5amp fuse and then a "fuse tap"? I honestly don't even know how the fuse tap works... But, I take it that it just attaches to the fuse and I connect one of the wires to it. Also, where do I attach the ground wire?

Thanks!

MARK CUMMINS

I Would have a shop or Someone Help you...so you Dont Fry the car..
Also you can wire it up at the dome light....power and ground

MB-BOB

Ground the negative to the driver's front fuse box, then run the positive to the trunk. crimp on a male "Spade Lug" connector and plug into slot #7. The inline fuse remains where it is the way it comes from the factory. It can stay under the driver's front fusebox. HTH.

nlpamg

Thanks guys! I'm gonna try it, but in the meantime here's what I did
https://mbworld.org/forums/off-topic/96522-got-my-v1.html