Where did you get your front lip? The fittment looks perfect

I got it from JL Motoring, www.JL-Motoring.com, that I found on the forum. I installed it myself and it does fit pretty well. There is a small gap on the right side near the wheel well, but it's not to bad.

Looking good, can you take some pics of how you installed the lip, as far as how it is attached to the bumper? Thanks

Here's my station wagon:

http://www.abload.de/img/p4301131f68am.jpg

http://www.abload.de/img/p4301137qf8ph.jpg

Hope you like it :)

I love it!

I'll see if I can get under the car and get some pictures but it was fairly easy. The lip came with screws and predrilled holes. All I had to do was run the car up on the ramps, and with my son's help. make sure that it was centered. Then I drove a screw through the left and then the right side to hold it in place.

The toughest part was that the screws they sent were not long enough to fit through the middle, which is probably 3 inches thick. So I predrilled the holes through the lip and bumper, then ran lag screws through the lip into a nut up under the bumper. Since the screws were silver, I gave then a short shot of flat black sprey paint so you didn't notice them from the front.

Here's a picture from down low from when I first installed it.

Attachment 379590

That would be greatly appreciated, thank you. Is your lip a solid piece of does it have about a 1.5" gap on the back side that runs the length of the lip? But yes, pictures would def help, trying to see how other lips are compared to mine and im still deciding what would be the best way to mount.

http://cdn.stripersonline.com/8/8e/8...tach389614.jpg

Wish that was sold here in the States! :y

I'll see what I can do this weekend, but yes the lip is thicker in the middle, about an inch and a half, and tapers down to about a half an inch thick at the ends.

It has pre-drilled holes about 18 inches apart where you just run the screws throught the lip into the bumper. I used lag screws with lock nuts in the middle three holes just to make sure it doesn't work it's way loose in the future.

Thanks, looking forward to the pics!

here is my 08 C300... still working on it though

https://mbworld.org/forums/members/s...2-dscf1445.jpg
https://mbworld.org/forums/members/s...3-dscf1446.jpg
https://mbworld.org/forums/members/s...4-dscf1447.jpghttps://mbworld.org/forums/members/s...5-dscf1450.jpg

Some Old Pics
Attachment 379519
Attachment 379520

I've been lurking in the forums for some time now so I thought I would introduce myself and share some pics. I need some rim suggestions. I'm thinking of going black.

http://www.danielbrackins.com/images/DSC_0610small.jpg

http://www.danielbrackins.com/images/DSC_0615small.jpg

http://www.danielbrackins.com/images/DSC_0620small.jpg

http://www.danielbrackins.com/images/DSC_0627small.jpg

Very sexy and clean. Love the rear.

Latest mods Euroteck front lip and rear diffuser
Attachment 379514

Attachment 379509

Attachment 379510

Saw your car at Wuste. Very nice! :y I really like your rims and I'm tempted to do the same setup. Do you also have springs?

Wow ! Lookin to do something like that to mine !

nice photoshop http://imageshack.us/a/img16/6718/4qle9w.pnghttp://imageshack.us/a/img85/2863/stephenahand.png

https://mbworld.org/forums/c-class-w...uest-c300.html

heres ur ride dog, no need to front....


https://mbworld.org/forums/members/a...546-benz11.jpg

Awesome photos daniel_c350.

Stance looks great Cleanbenz along with lip. I like that slammed look. Too bad it isn't actually slammed.

popp, still looks nice and red.

agedog2gt, lower or is it photoshopped? Still looks nice.

*EDIT*Thought it looked photoshopped. You can tell by right under front wheel there's a white spot.

Just posted a picture, how is that "trying to front "?

cuz your frontin like your not rollin on them 4x4's.......

Its a picture, Who cares?

And why are you messaging me about it too? Creep.

I bet your gonna go to each of my threads now a post a pathetic reply huh?

I already know you and i dont even know you.. haha