Official Part Numbers Thread
#301
Senior Member
Join Date: Mar 2011
Location: Orange County
Posts: 377
Likes: 0
Received 0 Likes
on
0 Posts
'10 C300
i couldn't find this using search so i ended up going to the dealer and figuring it out...
notch/fastener in the middle of the radiator mounting cover
A0029880542
(i had to replace it b/c i broke it when i tried to install a new grill)
notch/fastener in the middle of the radiator mounting cover
A0029880542
(i had to replace it b/c i broke it when i tried to install a new grill)
#302
C300 Manual shift knob
How about a manual shift knob for a C300? I'm looking for the bird eye finish with either aluminum or leather. Really, i'll take any part number for any manual shifter knob. I just need to get the factory one out of there.
Thanks guys!
Thanks guys!
#303
hey can someone help me find the number of the Chrome ring that goes around the fog light of the drivers side of the w204 sport ???
the ring that goes around this fog light
http://www.thebenzbin.com/parts/?N=1...294967159+2303
the ring that goes around this fog light
http://www.thebenzbin.com/parts/?N=1...294967159+2303
#304
Hi anyone knows the Partnumber for the C350 AMG diffusor (w twin exhaust)?
I have ordered a C180 Coupe (delivery End July/Begin August) and I would like to upgrade my single exhaust to the double exhaust C350 look.
Thanks!
I have ordered a C180 Coupe (delivery End July/Begin August) and I would like to upgrade my single exhaust to the double exhaust C350 look.
Thanks!
#305
Junior Member
Join Date: Apr 2009
Location: near Moscow
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
204.054 & 463.249
#307
Member
#314
Member
Join Date: Aug 2011
Location: Brunei Darussalam
Posts: 216
Likes: 0
Received 3 Likes
on
3 Posts
GLC250 Coupe
drink holder divider
Hi Guys!
This is going to be my first post so please be gentle. I'm from Brunei and I just took possession of my 2011 W204 yesterday and I must say, I'm really disappointed at the dealer here. They don't really know what they have and don't. We drive on the left hand side of the road and our cars are RHD. Very much similar to the UK
Thanks to this forum I have a Sunglass holder (Black) A20481000419051 on its way. I also asked them if I can order the diver that sits in the cup holder on the center console. I've seen the groove for it to fit in and i know from my previous cars that there usually is one. The dealer told me that there is no such part.
Was wondering if anyone can help me with the part number? Hopefully in black too.
I also realized that my car did not come with any legroom illumination as with the US models. I was able to open up the bottom piece, but couldn't find the wire nor plug to modify it. Would be helpful if anyone can tell me which wires their legroom illumination are connected to.
Thanks!
This is going to be my first post so please be gentle. I'm from Brunei and I just took possession of my 2011 W204 yesterday and I must say, I'm really disappointed at the dealer here. They don't really know what they have and don't. We drive on the left hand side of the road and our cars are RHD. Very much similar to the UK
Thanks to this forum I have a Sunglass holder (Black) A20481000419051 on its way. I also asked them if I can order the diver that sits in the cup holder on the center console. I've seen the groove for it to fit in and i know from my previous cars that there usually is one. The dealer told me that there is no such part.
Was wondering if anyone can help me with the part number? Hopefully in black too.
I also realized that my car did not come with any legroom illumination as with the US models. I was able to open up the bottom piece, but couldn't find the wire nor plug to modify it. Would be helpful if anyone can tell me which wires their legroom illumination are connected to.
Thanks!
#315
Member
Join Date: Aug 2011
Location: Brunei Darussalam
Posts: 216
Likes: 0
Received 3 Likes
on
3 Posts
GLC250 Coupe
Hi Guys!
This is going to be my first post so please be gentle. I'm from Brunei and I just took possession of my 2011 W204 yesterday and I must say, I'm really disappointed at the dealer here. They don't really know what they have and don't. We drive on the left hand side of the road and our cars are RHD. Very much similar to the UK
Thanks to this forum I have a Sunglass holder (Black) A20481000419051 on its way. I also asked them if I can order the diver that sits in the cup holder on the center console. I've seen the groove for it to fit in and i know from my previous cars that there usually is one. The dealer told me that there is no such part.
Was wondering if anyone can help me with the part number? Hopefully in black too.
I also realized that my car did not come with any legroom illumination as with the US models. I was able to open up the bottom piece, but couldn't find the wire nor plug to modify it. Would be helpful if anyone can tell me which wires their legroom illumination are connected to.
Thanks!
This is going to be my first post so please be gentle. I'm from Brunei and I just took possession of my 2011 W204 yesterday and I must say, I'm really disappointed at the dealer here. They don't really know what they have and don't. We drive on the left hand side of the road and our cars are RHD. Very much similar to the UK
Thanks to this forum I have a Sunglass holder (Black) A20481000419051 on its way. I also asked them if I can order the diver that sits in the cup holder on the center console. I've seen the groove for it to fit in and i know from my previous cars that there usually is one. The dealer told me that there is no such part.
Was wondering if anyone can help me with the part number? Hopefully in black too.
I also realized that my car did not come with any legroom illumination as with the US models. I was able to open up the bottom piece, but couldn't find the wire nor plug to modify it. Would be helpful if anyone can tell me which wires their legroom illumination are connected to.
Thanks!
A2046802391 for a standard divider Front/back cup max size are 82/74mm
A2126830191 for a fixed compartment type that allows you to put your phone, coins, etc.
#316
Member
Join Date: Aug 2011
Location: Brunei Darussalam
Posts: 216
Likes: 0
Received 3 Likes
on
3 Posts
GLC250 Coupe
Heat reflective panels between the exhaust and boot
Hi guys,
I've looking into modding my single exhaust W204 to a twin/quad exhaust system. I already have the part numbers for the exhaust and diffuser thanks to this thread.
My question is do you guys have the part number for the silver heat reflective panels MB use? I have a RHD vehicle and my original exhaust is on the left side. It already comes with the silver heat reflective panel between the exhaust and the boot.
I need the part numbers for the right side if possible. Thanks!
I've looking into modding my single exhaust W204 to a twin/quad exhaust system. I already have the part numbers for the exhaust and diffuser thanks to this thread.
My question is do you guys have the part number for the silver heat reflective panels MB use? I have a RHD vehicle and my original exhaust is on the left side. It already comes with the silver heat reflective panel between the exhaust and the boot.
I need the part numbers for the right side if possible. Thanks!
#317
does anybody have the parts numbers for the disks and pads as well as calipers for the US spec C300/C300-4 both sport and lux. Canada C250/C250-4 sport and lux as well as Canada C300/C300-4 sport. MY2010
#318
Banned
#319
#320
#321
Member
Join Date: Jun 2009
Location: NJ/PA
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
'09 C300 Sport 4Matic Arctic White
Tried searching. I know most people here replace their orange side markers with clear ones, but I'm looking for the PN for the standard orange ones. Thx
#322
MBWorld Fanatic!
Join Date: Jan 2008
Posts: 1,321
Likes: 0
Received 0 Likes
on
0 Posts
C300 Sport/Palladium Silver on Black/P2
If anyone ever wants a quick way to get the cabin filter, I found a solution on amazon:
http://www.amazon.com/Purolator-C458.../dp/B0031HNHOU
It's a Purolator, but when I got it, it says "Mann" on the filter and made in Czech Republic just like my OEM filter. Construction seems identical down to a handwritten number on the last pleat.
Oddly, some dealers are actually cheaper, but with free amazon shipping, this is a one click way to get the cabin filter.
Do NOT buy the beck arnley filter on amazon. It's from Taiwan and appeared to be poor quality.
The Purolator, at least the one I got, seemed to be absolutely genuine, just without the three pointed star of course.
Purolator C45844C is the part number.
http://www.amazon.com/Purolator-C458.../dp/B0031HNHOU
It's a Purolator, but when I got it, it says "Mann" on the filter and made in Czech Republic just like my OEM filter. Construction seems identical down to a handwritten number on the last pleat.
Oddly, some dealers are actually cheaper, but with free amazon shipping, this is a one click way to get the cabin filter.
Do NOT buy the beck arnley filter on amazon. It's from Taiwan and appeared to be poor quality.
The Purolator, at least the one I got, seemed to be absolutely genuine, just without the three pointed star of course.
Purolator C45844C is the part number.
#324
MBWorld Fanatic!
Join Date: Jan 2008
Posts: 1,321
Likes: 0
Received 0 Likes
on
0 Posts
C300 Sport/Palladium Silver on Black/P2
I had my yearly service done this week at Mercedes dealer.
Got the car back, looked under hood to make sure everything was sound before driving it back home, oil filler cap was all cut up. Functional of course, but huge gouges in it!
I figured they had either mixed up my filler cap or oddly used pliers to unscrew it. ha-ha. I had a several hundred dollar bill and a couple thousand in warranty work, so I figured, they would kindly give me a new oil cap as I had never even left dealership yet.
No, they threw a bit of a hissy fit. Wasn't possible, a mixed up cap or that they had put gouges in it. Well, it got gouges somewhere and I sure didn't do it. ha-ha. Later they called me and said they would give me a new one, less than $5 part.
Just seems odd not to do the right thing, the first time, when I wasn't even mad yet! ha-ha. I came home and confirmed my other car's filler cap looks perfect. Just really sloppy work. Engine cover covered in oil too, it will be shiny forever now. ha.
To the point, if I don't go back to get the cap from them, should any mercedes filler cap be fine that I can find new?
Got the car back, looked under hood to make sure everything was sound before driving it back home, oil filler cap was all cut up. Functional of course, but huge gouges in it!
I figured they had either mixed up my filler cap or oddly used pliers to unscrew it. ha-ha. I had a several hundred dollar bill and a couple thousand in warranty work, so I figured, they would kindly give me a new oil cap as I had never even left dealership yet.
No, they threw a bit of a hissy fit. Wasn't possible, a mixed up cap or that they had put gouges in it. Well, it got gouges somewhere and I sure didn't do it. ha-ha. Later they called me and said they would give me a new one, less than $5 part.
Just seems odd not to do the right thing, the first time, when I wasn't even mad yet! ha-ha. I came home and confirmed my other car's filler cap looks perfect. Just really sloppy work. Engine cover covered in oil too, it will be shiny forever now. ha.
To the point, if I don't go back to get the cap from them, should any mercedes filler cap be fine that I can find new?
Last edited by mac911; 11-12-2011 at 01:34 AM.