AutomotiveDezignz-Brand NEW--!!!-- Light weight power pulley for the W204 V6/V8
#26
MBWorld Fanatic!
#29
really constructive post... they did post dyno sheets. i just wished that it showed the baseline run & after the pulley.
either way, its way overpriced.
#31
MBWorld Fanatic!
Company is still alive. I just spoke with them yesterday, except they've been banned here. I don't know why, my best guess, they probably didnt pay their sponsor dues.
#34
MBWorld Fanatic!
Join Date: Mar 2006
Location: Hong Kong
Posts: 1,375
Likes: 0
Received 16 Likes
on
15 Posts
2010 C200 CGI
That's interesting, the dyno is done by a tuning company here in Hong Kong though the poster states they are from LA, USA. Checking on the tuner shops site in HK all I see listed for Benz are H&R springs.
#37
MBWorld Fanatic!
Join Date: Sep 2008
Location: Delaware
Posts: 1,331
Likes: 0
Received 9 Likes
on
8 Posts
2004 Mazda6, 1993 RX7
While the thread is up: Power Pulley Rules:
1) if just the weight is lightened, expect no improvement, as crank and fw/TC inertia will dominate.
2a) if underdriven, then max power will be in 1st gear, where highest acceleration of pulley and driven parts occurs, now with less acceleration.
2b) if underdriven, a slight improvement in steady state power at higher revs will be due to less power absorbed by driven devices, assuming each device has a constant resistive torque.
.
1) if just the weight is lightened, expect no improvement, as crank and fw/TC inertia will dominate.
2a) if underdriven, then max power will be in 1st gear, where highest acceleration of pulley and driven parts occurs, now with less acceleration.
2b) if underdriven, a slight improvement in steady state power at higher revs will be due to less power absorbed by driven devices, assuming each device has a constant resistive torque.
.