Comand secret engineering menu?
 

Search isn't my friend so what buttons I need to push on my Comand to access secret engineering menu? Ty for help.

Anyone have got iPod video work on Comand?

search "reverse camera"

Ipod video doesn't work. To access engineering menu push and hold Hang up, 1 and $ on the command unit. Have fun.

can someone tell me again how to access the command menu on a 2009 w204

Push Hang UP , 1, and # at the same time for and it will switch to the engineering menu

I cannot wait until, i am up and running so I can configure the daylights out of my Comand HU

Are there any useful settings in this menu?

Also, and more importantly, are there any settings to avoid fiddling with in order to avoid problems?

Yes there is. I don't remember the exact menu name but don't mess with anything that has Update in the name.

The setting to avoid at all cost is the Update Menu. Unless you know what you are doing or the have the update CDs or DVDs.

other than turning the max volume up from i think 75 to 80 i havn't done anything else... :\

wish there was more to be done... i have a thread asking about the equalizer but no responses on that one yet i guess.

I used mine to adapt the Euro COMAND unit to my US car:
Changed DVD regin to 1
Got rid of a wired telephone that it originally had
Change the way the radio statinos appear on the display
Installed backup camera.

How do you do that

(the max volume thing)

Is there a listing of the available engineering menu items?

Are they different in the Comand unit and in the "speedometer" display?

What do you see after this? I did not see anything but I heard a tone.

-DW

i also wanted to know how to turn off all the assist systems like ABS BAS ESP, cause it doesn't apear in the command menu ??????

I just updated the Navigation with the latest DVDs, but I think I missed a step as it is not retaining the original base location? i.e. once I power down and power back-up, it does not retain the location?

went into the dealer got the Axial blower installed, got the MOST Ring reconfigured, and SCN Code versioning done - everything is fine now. However, the local dealer would not set the up my IC to receive and display the NAV data:mad:. They said that it was because they cannot install anything that was not already on the car:wall: - which seems to mean that they hit the SCN coding barrier. However, I am looking for ways to get around that at other dealers. I hope to have that feature enabled soon.

How? Can you please let us know what menu to go to increase the MAX volume?

my bad i didn't even see this thread... i assumed yall would experiment...

here are the steps...

http://www.lookpic.com/files/sound1.jpg

HOLD for 5-10 sec

http://www.lookpic.com/files/Sound2.jpg

ADVANCED MENU

http://www.lookpic.com/files/Sound3.jpg

http://www.lookpic.com/files/Sound4.jpg

http://www.lookpic.com/files/Sound5.jpg

I believe the original setting is 75 as the MAX


lemme know if it makes a difference for you all...

also, just went out to my car..

there is an option on the MM eng menu for aux video input...anyone know where the input jacks are?

What buttons are they Red Hangup and ____ ?

red hang up, #, and 1 all at the same time

Its at the back of the COMAND unit. You have to take it out to get access to it. See the Rear view Camera threads.

There are pics of the back of the Comand (w APS and non APS) within this thread too check out this thread

https://mbworld.org/forums/c-class-w...-retrofit.html

It is the Green Connector in the back of the Units - Aux Video