FS: W204 Carbon Fiber Front Lip Spoiler $260 shipped
Senior Member
Joined: Mar 2012
Posts: 349
Likes: 6
C300 Sport
Are these lips supposed to come with 6 screw holes? I only have two; one on either end of the lip. And if I am not mistaken, the holes are on the bottom part of the lip, unless I'm missing something here? According to the pictures I've seen, I believe I have it oriented correctly.
Any help?
Any help?
MB World Stories
The Best of Mercedes & AMG
Manual Mercedes? 6 Times Sindelfingen Let Drivers Have All The Fun
Verdad Gallardo
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Verdad Gallardo
8 Classic Boxy Mercedes Designs That Have Aged Like Fine Wine
Verdad Gallardo
Flawlessly Restored Mercedes 190E Evo II Heads to Auction
Verdad Gallardo
Electric Mercedes C-Class Unveiled: 11 Things You Need to Know
Verdad Gallardo
Mercedes EQS Gets A Major Update: Everything You Need to Know
Verdad Gallardo
5 Underrated Mercedes-Benz Models That Don't Get the Love They Deserve
Verdad Gallardo
Mercedes 300D Has Pushed Well Past 1 Million Miles and It Ain't Stopping
Verdad Gallardo
10 Most Reliable Mercedes-Benz Models You Can Buy Used
Verdad Gallardo
Newbie
Joined: May 2013
Posts: 3
Likes: 0
2008 C350
Customer service from Gary was very fast and shipping speed and quality was excellent.
I used 3 screws on each of the outside edges and 2 on each of the little
bumps on the middle. I used a very small amount of 3m tape only to tighten up a very small gap. Around the outside edges between the body and the lip I carefully used some black silicon to seal up and eliminate the very small seam gap and cleaned it and made it really smooth. Pre-drilled all of the holes in the lip, lined it up on the car and pre-drilled smaller holes into the bumper for the screws to go into. Predrilling everything made sure I had no cracks or splits in either surface. Had the whole job done in less than an hour. It fit really well for being an aftermarket piece.
I used 3 screws on each of the outside edges and 2 on each of the little
bumps on the middle. I used a very small amount of 3m tape only to tighten up a very small gap. Around the outside edges between the body and the lip I carefully used some black silicon to seal up and eliminate the very small seam gap and cleaned it and made it really smooth. Pre-drilled all of the holes in the lip, lined it up on the car and pre-drilled smaller holes into the bumper for the screws to go into. Predrilling everything made sure I had no cracks or splits in either surface. Had the whole job done in less than an hour. It fit really well for being an aftermarket piece.
Thread Starter
Former Vendor of MBWorld
Joined: Sep 2009
Posts: 4,277
Likes: 25
From: Los Angeles, CA
.
Thanks for the kind words and feedback!
I originally ordered some C63 coupe CF front lips which are coming this week but now the supplier told me these lips are actually for the regular coupe so I will find out what they are exactly when they arrive.
I originally ordered some C63 coupe CF front lips which are coming this week but now the supplier told me these lips are actually for the regular coupe so I will find out what they are exactly when they arrive.
Member
Joined: Aug 2012
Posts: 130
Likes: 1
From: Montreal
2016 C450 AMG // 2015 ML550 // 2014 911 Carrera 4
Gary, if you ever get a 2012+ lip, I'll take it right away! Reading through the thread, it seems you have quite a bit list of 2012+ customers waiting. 
