Don Nguyen | **Vinyl Roof Wrapping Services + Stickers/Graphics and more!**
#551
Former Vendor of MBWorld
Thread Starter
I’ve worked on several cars for the owner of this white Audi RS7 sedan in the past. This time he came by to have me vinyl wrap the roof of his RS7 with my gloss black vinyl material to give it the panoramic look. In addition to wrapping the main section/portion of the roof, I also wrapped the smaller rear top hatch part that sits right behind the main section of the roof. This gave it a smooth transition from the roof to the rear glass. The owner of this car came to me in Anaheim Hills/Orange County to have the work done.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
#552
Former Vendor of MBWorld
Thread Starter
Typically people have their roofs wrapped, but the owner of this white Honda CRZ had me vinyl wrap the hood of her car, using the 3M dinoc matte carbon fiber material. Due to the design of the material, and even carbon fiber weave in general, the material looks different from different angles as you walk around the car.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
#553
Former Vendor of MBWorld
Thread Starter
The owner of this white Audi Q5 brought me her car to have me lightly smoke/tint her tail lights with my film. I’ve had a lot of people ask me recently if I have any other shades, but this is actually the only shade I have used and posted pictures of for the past couple of years now. In addition to her tails, I also did the lower bumper reflectors to match the tail lights, but left the upper third brake light alone. She brought her car to me in Anaheim Hills/Orange County to have the tinting work done.
Before:
Driver/left side tinted - passenger/right side stock:
After:
-Don Nguyen
donathon@gmail.com
Before:
Driver/left side tinted - passenger/right side stock:
After:
-Don Nguyen
donathon@gmail.com
#554
Former Vendor of MBWorld
Thread Starter
For this black Lexus GS350 sedan, I vinyl wrapped the chrome/brushed aluminum trim around his windows, rear chrome trunk bar and front chrome grill surround in my gloss black vinyl material. We went with gloss black over matte black to have the trim pieces blend in with the rest of the black paint better. The owner of this car was from Orange County as well and drove out to me in Anaheim Hills to get the work. Getting rid of all of the chrome really cleans up the lines of the car quite a bit.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
#555
Former Vendor of MBWorld
Thread Starter
On this white Mercedes Benz E350 sedan, I vinyl wrapped the roof of the car with my gloss black vinyl and also blacked out the chrome/brushed aluminum window trim with the same gloss black finish. I had some requests to post pictures of cars with roof spoilers that were left white, so here’s an example of a car that had the roof vinyl wrapped gloss black but left the roof spoiler body colored. In addition the the chrome around the window trim, I also blacked out the rear trunk chrome bar. The owner of this car drove out to me in Anaheim Hills/Orange County to have the work done.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
#556
Former Vendor of MBWorld
Thread Starter
Most of the pictures of interiors that I’ve wrapped and posted in the past were of the 3M dinoc matte carbon fiber finish. However, the owner of this BMW E46 3 series had me vinyl wrap the interior on his car in the 3M 1080 gloss carbon fiber finish. The 1080 gloss carbon is more black versus the dinoc matte carbon which is more of a grayish finish. The owner of this car drove out to me in Anaheim Hills/Orange county to have the work done. I thought the way this finish turned out on the interior went well with the car.
-Don Nguyen
donathon@gmail.com
-Don Nguyen
donathon@gmail.com
#557
Former Vendor of MBWorld
Thread Starter
The owner of this blue E92 M3 has had me do several of his cars in the past before as well. This time he brought me his car to have me lightly smoke/tint the tail lights on his car. Sorry for the before/during pictures, the lighting wasn’t as good, but hopefully you can see how the tail lights look like in the after pictures. The owner of this car was around Newport Beach are and came out to me in Anaheim Hills/Orange county to have the tint work done. It’s a fairly light shade, which gives it a very factory look.
Before:
Driver/left side stock - passenger/right side tinted:
After:
-Don Nguyen
donathon@gmail.com
Before:
Driver/left side stock - passenger/right side tinted:
After:
-Don Nguyen
donathon@gmail.com
#559
Former Vendor of MBWorld
Thread Starter
This is one of the cars that I did during one of my trips up to norcal/bay area to do wraps up there. The owner of this black Mercedes Benz E63 brought his car by to me to have me black out his chrome window trim with my gloss black vinyl material as well as lightly tint / smoke his head lights and tail lights. Took some up close pictures of the edges of the trim and lights to show the coverage and details for those who have asked or were interested in seeing more detailed pictures of my work. The tint / smoke film material that I use is fairly light, as to minimize the amount of light output that is reduced/decreased. It's also light enough where you should not get any hassle/issues from cops for them, as they almost resemble how a lot of factory tinted / smoked tail lights look now a days.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
#560
Former Vendor of MBWorld
Thread Starter
I thought the car looked awesome before, and the black roof really sets it off just ties in with the car very nicely. The owner of this Mars Red Mercedes Benz C63 had me vinyl wrap the roof of his car my gloss black finish vinyl material. The owner of this car was from San Diego. I know most of the cars that I do are white cars, but this just goes to show that the black roof looks good on other colored cars as well. The only other thing I would have done to this car would have been to black out the chrome/brushed aluminum window trim.
Had some people ask for some indoor shots and outdoor shots for comparison, so here they are.
-Don Nguyen
donathon@gmail.com
Had some people ask for some indoor shots and outdoor shots for comparison, so here they are.
-Don Nguyen
donathon@gmail.com
#563
Former Vendor of MBWorld
Thread Starter
The owner of this white Mercedes C350 sedan had me vinyl wrap the roof of his car in my gloss black vinyl material. We went with the gloss black to give the car a panoramic look, which flowed well with the glass sunroof of the car. The owner of this car was from Tustin/Irvine area and came out to me in Anaheim Hills/Orange County to have the work done.
-Don
donathon@gmail.com
-Don
donathon@gmail.com
#564
Former Vendor of MBWorld
Thread Starter
Some requests for these pictures, so I figure I'll post them up here. This is one of the cars that I did while I was up in the bay area (san jose) / norcal area last time. I tinted / smoked the tail lights on this new Mercedes Benz E63 AMG. In addition to the tail lights, I also blacked out the chrome / brushed aluminum window trim on his car with my matte black vinyl material. Everything worked and tied in together pretty nicely with the rest of the theme of his car:
Before:
Left/driver side stock - Right/passenger side tinted/smoked
After:
-Don Nguyen
donathon@gmail.com
Before:
Left/driver side stock - Right/passenger side tinted/smoked
After:
-Don Nguyen
donathon@gmail.com
#565
Former Vendor of MBWorld
Thread Starter
This is one of the cars that I did some vinyl work on when I was up in norcal / Bay Area for vinyl wrapping. The owner of this car had me black out the chrome / aluminum window trim on his black E65 wagon. In addition to that, I also tinted his tail lights with my smoke film. Instead of tinting the entire tail light, I cut out the clear portion of the tail lights so that only the red is tinted / smoked. At first I wasn't sure how it'd look, but the contrast it ends up creating is pretty nice and I must say I like it. We also went with the matte black over the gloss black for the window trim, to provide some contrast to the gloss black paint and allow the trim pieces to still accent the car.
Before:
Driver (left) side stock - Passenger (right) side tinted / smoked before clear portion was trimmed out:
After:
Tinted / smoked tail lights WITH clear portion trimmed out now:
-Don Nguyen
donathon@gmail.com
Before:
Driver (left) side stock - Passenger (right) side tinted / smoked before clear portion was trimmed out:
After:
Tinted / smoked tail lights WITH clear portion trimmed out now:
-Don Nguyen
donathon@gmail.com
#566
Former Vendor of MBWorld
Thread Starter
This is one of the few new BMW F30 silver 328i sedan that I have wrapped with the 3M Di-noc matte carbon fiber finish recently. As you can see, the finish/look of the cf vinyl roof changes depending on the angle that you are looking at it and how the light reflects off of it. The matte carbon roof complimented the darker colored wheels that were on the car fairly well. The pictures don't do it much justice, since I was mainly focusing on capturing an accurate portrayal of the roof vs the finish of the wheels. The owner of this car drove out to me in Anaheim Hills/Orange County to have his roof wrapped.
-Don Nguyen
donathon@gmail.com
-Don Nguyen
donathon@gmail.com
#567
Former Vendor of MBWorld
Thread Starter
I really believe that blacking out the chrome/brushed aluminum on bigger bodied cars, such as this black Mercedes Benz S550 makes a huge difference and changes the look of the car completely. For this S550, I blacked out the chrome around the windows, the lower chrome bars on the bottom of the doors and the rear back chrome trunk bar piece with my gloss black vinyl material. I believe the owner of this car was from either Los Angeles or San Diego and drove out to me in Orange county/Anaheim Hills to have the work done. We went with the gloss black finish to match the finish on his already gloss black powder coated wheels.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
#568
Former Vendor of MBWorld
Thread Starter
For this white Mercedes Benz GL550, I blacked out the chrome/brushed aluminum window trim in my matte black vinyl material. In addition to the window trim pieces, I also did the chrome on the grill area, lightly smoke/tint the head lights, blacked out the chrome on the top of the door handles, and blacked out the chrome on the door moulding pieces. The owner of this car was from Newport Beach and came out to me in Anaheim Hills/Orange County to have the vinyl work done.
Before:
Before:
-Don Nguyen
donathon@gmail.com
Before:
Before:
-Don Nguyen
donathon@gmail.com
#570
Former Vendor of MBWorld
Thread Starter
For this silver Mercedes E63 AMG sedan, I blacked out the chrome/brushed aluminum window trim with my gloss black vinyl material to give it a factory OEM look. I think the gloss black went well with the silver color of the car. Something small and minor such as blacking out the chrome window trim can change the look of the car completely. The owner of this car came out to me in Anaheim Hills/Orange County to have the vinyl work done.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
#571
Former Vendor of MBWorld
Thread Starter
I did quite a bit of work on this black Mercedes Benz C250 sedan. I blacked out the chrome/brushed aluminum window trim, the lower door pieces, rear trunk bar and the front day time running light chrome pieces. In addition to those, I also lightly tinted the head lights and tail lights. I took some pictures with one side tinted and one side stock, to show the differences between stock versus tinted with my film. It’s a fairly light film, which gives it a OEM+ look. The owner of this car was from Inland Empire I believe and came out to me in Anaheim Hills/Orange County to have the work done.
Before:
After:
Driver/right tinted - Passenger/left side stock:
Driver/left side tinted - Passenger/right side stock:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
Driver/right tinted - Passenger/left side stock:
Driver/left side tinted - Passenger/right side stock:
After:
-Don Nguyen
donathon@gmail.com
#572
Former Vendor of MBWorld
Thread Starter
In addition to vinyl wrapping, I have started offering plasti dipping services.
I did quite a bit of work on this Black Mercedes Benz E350 blutech. I blacked out the chrome/brushed aluminum window trim, lower chrome door pieces, and rear trunk chrome bar with my gloss black vinyl material, lightly smoked/tinted the tail lights, plasti dipped the wheels, rear badges, and front grill. Unfortunately, I forgot to take a picture of the front grill after I was done. The owner of this car came from San Diego up to me in Anaheim Hills/Orange County to have the vinyl work and plastidip work done on his car.
Before:
Driver/left side tinted/smoked - Passenger/right side stock:
After:
-Don Nguyen
donathon@gmail.com
I did quite a bit of work on this Black Mercedes Benz E350 blutech. I blacked out the chrome/brushed aluminum window trim, lower chrome door pieces, and rear trunk chrome bar with my gloss black vinyl material, lightly smoked/tinted the tail lights, plasti dipped the wheels, rear badges, and front grill. Unfortunately, I forgot to take a picture of the front grill after I was done. The owner of this car came from San Diego up to me in Anaheim Hills/Orange County to have the vinyl work and plastidip work done on his car.
Before:
Driver/left side tinted/smoked - Passenger/right side stock:
After:
-Don Nguyen
donathon@gmail.com
#574
Former Vendor of MBWorld
Thread Starter
For this Silver Mercedes Benz C300 sedan I vinyl wrapped the roof with my gloss black vinyl material. Most cars that I have come by are either black or white, but I think the gloss black roof looks good on other colored cars as well, such as this silver C300. The gloss black roof gives the car a new/different look, without making it seem like an aftermarket piece. If someone looked at it without knowing, you wouldn’t think twice about it. It gives the car a sportier look as well. The owner of this car came out to me in Anaheim Hills/Orange county to have the vinyl work done.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
#575
Former Vendor of MBWorld
Thread Starter
I am not sure who asked me, but someone on this forum asked about how my tint/smoke film that I typically use on tail lights would look like if it was applied over a chrome finish, to give it a gunmetal chrome or hyper black type finish/look to it. What I did for this car is probably going to be close or similar to that as it is going to get for the moment, unless someone does come by to actually have me apply the film over their chrome pieces.
This is something different and new that I haven’t done before. I had blacked out the chrome trimming on this Lexus IS350 sedan in the past, but this time the owner of the car had me apply my tint/smoke film, which is what I normally use on the tail lights I’ve posted, to the front center emblem of the car to slightly tone it down. The pictures I took of it inside aren’t the best, since the lighting was pretty dark. However, you can still get an idea of how it looks like before/after the film was applied.
Before:
After:
-Don Nguyen
donathon@gmail.com
This is something different and new that I haven’t done before. I had blacked out the chrome trimming on this Lexus IS350 sedan in the past, but this time the owner of the car had me apply my tint/smoke film, which is what I normally use on the tail lights I’ve posted, to the front center emblem of the car to slightly tone it down. The pictures I took of it inside aren’t the best, since the lighting was pretty dark. However, you can still get an idea of how it looks like before/after the film was applied.
Before:
After:
-Don Nguyen
donathon@gmail.com