Don Nguyen | **Vinyl Roof Wrapping Services + Stickers/Graphics and more!**
#101
MBWorld Fanatic!
#102
Former Vendor of MBWorld
Thread Starter
I can special order it. I've never personally used it before, since it's not a common finish people request/ask for.
It does not look as good as the black cf vinyl, since it doesn't have that 3D look, because it is a lighter finish.
-Don
It does not look as good as the black cf vinyl, since it doesn't have that 3D look, because it is a lighter finish.
-Don
#105
Senior Member
#107
Former Vendor of MBWorld
Thread Starter
Do you guys have any specific or general questions about anything? Or if you guys want me to take pictures of the cars that I do at certain angles or specific places/parts, let me know.
More of the white 350z with the vinyl wrapped gloss black roof:
-Don
More of the white 350z with the vinyl wrapped gloss black roof:
-Don
#110
Former Vendor of MBWorld
Thread Starter
Got some new pictures that I haven't posted up, that I'll do later today or tomorrow.
Let me know if you guys want any specific pictures/angles for me to take, before/after/etc of the vinyl on the cars, and I'll see what I can do for you.
Also, feel free to post any thoughts or feedback you might have. Always looking for new ideas to do and try out
-Don
Let me know if you guys want any specific pictures/angles for me to take, before/after/etc of the vinyl on the cars, and I'll see what I can do for you.
Also, feel free to post any thoughts or feedback you might have. Always looking for new ideas to do and try out
-Don
#111
MBWorld Fanatic!
Join Date: Sep 2009
Location: Dix Hills, New York
Posts: 2,108
Likes: 0
Received 7 Likes
on
7 Posts
2012 C250 Coupe
Hey, I am about to get my roof wrapped and a small section of my grille in gloss black. Is it possible for you to PM me an avg price to expect (or one you would charge) so I don't get ripped off like I did getting charged $275 only to install my x-pipe...
If you could break it down into roof wrap gloss black in a c300. And then to wrap the 6 slotted areas on our star grilles (behind the chrome) that are about 1ft wide and 4" deep each.
Great pics, any way you can take a picture of a car from not-so close up?
If you could break it down into roof wrap gloss black in a c300. And then to wrap the 6 slotted areas on our star grilles (behind the chrome) that are about 1ft wide and 4" deep each.
Great pics, any way you can take a picture of a car from not-so close up?
#112
MBWorld Fanatic!
Don where are you located exactly? I know you said you're off the 5 and Culver, but there's only one plaza there and a bunch of homes. Are you an "at home" business? I was gonna drop by today for you to give me a quote on a grille wrap cuz you said you needed to see what you'd be working with.
#113
Former Vendor of MBWorld
Thread Starter
If you're just dropping off parts, you can come by where I live to drop it off. If you're getting a bigger job done, IE tails/roofs/etc, then I do it at Hyevon Motors.
-Don
-Don
#116
Former Vendor of MBWorld
Thread Starter
1. The vinyl is only so wide, so it needs to be applied a specific/certain direction/way and the roof spoiler is real cf.
2. The roof spoiler is real cf.
-Don
2. The roof spoiler is real cf.
-Don
#120
Former Vendor of MBWorld
Thread Starter
Had someone request me post some pictures of blacked out window trim and misc chrome parts.
I did the window trim on this C63, along with his chrome trunk lid handle and the top half of his side mirror blinkers.
Before:
After:
-Don
donathon@gmail.com
I did the window trim on this C63, along with his chrome trunk lid handle and the top half of his side mirror blinkers.
Before:
After:
-Don
donathon@gmail.com
#121
Former Vendor of MBWorld
Thread Starter
Been having quite a few people ask me about interior wrappings, so here's some pictures so you guys can all see, versus me PMing people the same pictures over and over again.
Here's pictures of an E92 335's interior that I wrapped in the 3M carbon fiber di-noc vinyl material:
-Don
Here's pictures of an E92 335's interior that I wrapped in the 3M carbon fiber di-noc vinyl material:
-Don
#122
Did you remove the trim before wrapping or did you do it in-place? Just wondering how well the wrap would hold considering the small widths/areas vs larger sections like roofs, etc.
#123
Former Vendor of MBWorld
Thread Starter
Did something different and new. Wrapped the tails of a C63 in gloss black around the border/outline of the tail lights in vinyl.
Stock tail lights:
After pictures:
-Don
donathon@gmail.com
Stock tail lights:
After pictures:
-Don
donathon@gmail.com
#124
Junior Member
Join Date: Jun 2010
Location: Los Angeles
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
Range Rover SC, Audi A3, Audi Q5, GTI337
Tail light black boarder
-Don
donathon@gmail.com[/QUOTE]
Now that what i'm talking about!
This is what i've been looking for, the Brabus Tail Light Ring look.
#125
Former Vendor of MBWorld
Thread Starter
It wasn't easy, but I definitely welcome new ideas from you guys to do/try out, like the owner of that C63 who asked me if I could do his tails in that style
-Don
-Don