Frnakito71

I test fit it the adapter last week and it fits the lights, I will be doing the install next week some time and will keep you in the loop….

2nice4me

You still need power conversion?

Richard2011

Would this mean drilling would not be required for an HID fog setup?

AntsE63S

what is is made out of??

Frnakito71

I don't get the ???

No drilling at all

Plastic

AntsE63S

are you going to be putting these into production or something?? Could you tell me where to get these at because im going to be redoing my hid fog lights

Frnakito71

Is not actually meant for the Mercedes but for an E39 BMW but it is the same adapter as our H7 fogs. Is not a plug and play but it does fit.
http://store.ijdmtoy.com/BMW-E39-5-S...adapter_08.htm

AntsE63S

do you have to modify them at all to make them fit??

Frnakito71

In the picture the top one you can see a flat peace that you have to remove in order to fit the Mercedes fogs. But that’s about it, you do have to take the front bumper off the car to make the job a lot easier for you.

AntsE63S

i actually didn't take the bumper off when i did my lights. i removed the fog lights with the bumper on. it took some time but i still did it. i think next time around I'M going to remove the bumper

AntsE63S

could you post a better picture of what i have to modify??

Frnakito71

Now how did you do that??? Lots of time to do that??


I will this week

Richard2011

Did these adapters ever work out?

Frnakito71

They sure did! I had to take out the fog light all the way out to do it but it fits like a glove…

Richard2011

That's good news! Do you happen to have any pictures, like a picture from behind the bumper or of the bulb in the adapter before you put it in the fog light housing?

Frnakito71

I for got to do that! But I can take one with it on soon.

jctevere

I never took my bumper off either. Just used a ratchet to get the foglight out from the front after removing the mesh grill surrond.

snarlingchicken

Just received my pair for my future HID install. Hope to report back on how much they help compared to the standard drilling technique.

2nice4me

Received my HID kit but was not able to install it without these adapters. I plugged everything in to see if there was any power issues but aside from needing these adapters the rest of the jobs seems straight forward.

I ordered them from Ebay for under $10 including shipping (now waiting)

rberg925

Im so doing this. Please post some finalized pics!

hutch300

I have a set of H7 4500k 35watt DDM tuning HIDs i will sell for 45 shipped

they include error cancelers

Brisk335

Bringing a thread back from the dead, but how does the bulb stay on the adapter? does it pop in or screw on?

Or just lay on the adapter and get sandwhiched between the housing and adapter?

Frnakito71

It lays on the adapter and gets sandwhiched into the holder.

so_juanderful

Will this work c63 fog light hid conversion?

AZN Optics

yes. You can find those all over ebay for like $3-6. Just search for "H7 HID bulb holder". There's a metal version and a plastic version. Both will work. You'll need a full H7 HID conversion kit also. If you don't already have, we're distributors for top shelf Morimoto HID kits if interested