DanielQuoc

I'd like to install this on brows and interior.

AZN Optics

Brows you simply twist off the dust cap, reach in and pull straight out the connector which is pressure held. If you can't get a good grip on the connector, use needle nose pliers. Start from the passenger side as you have more space to work with. Then just pull out the stock bulb and plug mine in.

For interior, everything is just clips, so you can pop out everything with a simple wedge tool. All the interiors are 194 wedge LEDs, and a single 41mm festoon LED in center rear dome.

DanielQuoc

Thanks for being so helpful and replied fast in your PM.

I got it yesterday and installed right away. looks amazing!

Can't wait to get HID next.

ilde10

Hi i would like to order the 4 leds for my eyebrowns on my c300 please. Could you email me for paypal payment @ icerruto@yahoo.com

thank you

AZN Optics

Invoice sent.

BathingHobo

AZN Optics, not sure if you remember me but I bought a set of eye brows LEDS from you awhile ago and 3 out of 4 of them flicker constantly. They weren't like that for the first month or so, but now they all flicker. Any ideas/suggestions?

AZN Optics

Try reseating them. Sometimes if the clip isn't tight, engine vibration and debris can interfere with the contact points. If that doesn't resolve your issues, shoot me an email at aznoptics@gmail.com with pics of the LEDs and I'll diagnose and confirm your mailing address.

rkliew

Mike, my V3s have the same flickering problems too. It only happens to 1 side panel out of 4 which means contact is good otherwise the whole unit should be flickering.

Note: V3 - 4 side panels & 1 top.

AZN Optics

Hmm, you both have the first batch of V3s. Wonder if there was something up with that batch. I'll need to talk to my manufacturer to see if they did anything different with their standard QC checks. Shoot me an email at aznoptics@gmail.com to take care of warranty.

BenzManNy

I am new to this. I am looking to replace the headlights, license plate and the eye lids on a 09 c300. I have seen the videos, pictures and reviews and I am ready to move forward. I need options as far as what can I get for kits. I need them to be very white with a hint of blue. Please PM me some options and prices.

KCaudell

Michael,

I'd like to do the eyebrows (4 LED @ 5000K), the blinkers, and side markers.

Price? Availability?

Thanks.

K

AZN Optics

3 sets of 194 wedge and 1 set of 3457 super wedge leds with IC flasher unit. Available and in stock. You can order from our site www.aznoptics.com. Feel free to PM me if you have questions.

Seraphim

Hey Mike, I am also having some flickering issue with my eyebrow LEDs that I bought a while ago, I pulled one out and they looked burnt...

AZN Optics

Burn off marks are normal as the resistor does heat up. If it's flickering, check the contacts to make sure they are clean and free of debris. If the connector clips aren't tight, the LEDs can shift from normal engine vibrations or big bumps so try reseating them to see if that resolves the issue. If not, email me at aznoptics@gmail.com pics of both sides of the unit so we can take a look at it and include your order number and current mailing address to begin warranty process

MickiesC300

I wish you guys lived closer I have no idea how to install these if I purchased them. I live in a small town and not many around my area seem to modify their cars. They're all older. I want to make mine prettier. Someone help me? It would be so nice to have a car meet in my area.

AZN Optics

There are a few DIY guides already posted around so take a search around

CoolBDPhenom03

It's not that hard. You just need small hands.

PM me if you can't find a DIY on the forums or if you have questions.

MickiesC300

I don't have a clue about cars guys I'm a girly girl , I have small hands lol but don't think that will help much. Thanks guys!

AZN Optics

small hands honestly is half the battle. Otherwise, have to use needle nose pliers. Simply locate the back of where the city light bulb is in relation from the front and pull the connector straight out. It's pressure held in place. Be sure not to grab by the wires however tempting it may be because you run the risk of stripping. You can pull out the plastic bracket to give you more room to see also which is held on top by screws.

CoolBDPhenom03

If you're still struggling after that info, PM me your number and I'll walk you through it over the phone.

TonyLukes3

Mike, just received the 5000k Morimoto HID kit & 3457 Amber LED's for my turn signals today. Put the turn signals in so far, they look great! HID's will be installed this weekend.

Quick question, for the interior lighting does the V4 of the interior 194 wedge LED's fit? Or should I just go with the V3?

Thanks!

AZN Optics

Yes, we tested it out and V4 fits all the interior.

imboom

After many many years, my first batch of LED's from you finally went out. I'm talking about when everyone was trying to get LED's in their eyelids and you helped the community tremendously by going out and researching the right ones and group buying them.

I'm ready for another set but since I haven't followed the LED threads lately, just for the 4 eyelids(I don't want to run mismatched color/age) do I still stick with the 194 v3? Or is there any recommended ones for my P2(HID) 08 C350?

Would love an invoice sent to 96818 too if possible, if not I'll just grab them off the site.

AZN Optics

Actually you'll want our V4 (previously named V2.5, but due to confusion with some customers, we just advanced the major version number). I can set you up with 2 sets of our V4 LEDs in 5000K for $35 shipped anywhere in US. Just PM me your paypal email address and I'll shoot you an invoice.

cashbrown8

Just ordered HID H7 Headlights 6000K - Morimoto H7 kit
Excited for the order!! thanks AzN. OPTICS