AZNOptics.com Storefront - W204
#326
SPONSOR/MBworld Guru
Thread Starter
We carry 5000K and 6000K Morimoto HID kits. These retail for $150/kit.
#327
Senior Member
Will they project correctly even if I don't have the hid package just the standard headlight buckets not the hid
#328
SPONSOR/MBworld Guru
Thread Starter
#329
Senior Member
I hve a 2010 c300 4matic sport. They didn't come with the hid package it's just regular bulbs idk of its a projector lights are blue looking at all
#330
Senior Member
I hve a 2010 c300 4matic sport. They didn't come with the hid package it's just regular bulbs idk if its a projector lights are not blue looking at all
#331
SPONSOR/MBworld Guru
Thread Starter
You have halogen projectors. Not as good as xenon projectors, but definitely not as bad as reflectors. You'll be able to run HID kits behind those projectors with decent enough cut off that you won't be blinding anyone.
#333
SPONSOR/MBworld Guru
Thread Starter
#335
SPONSOR/MBworld Guru
Thread Starter
Did you know AZN Optics also provides household LED lighting solutions too?
1102.6 Lumens at only 10 watts!
![](http://www.aznoptics.com/images/Corn.jpg)
http://www.aznoptics.com/index.php?m...products_id=78
1102.6 Lumens at only 10 watts!
![](http://www.aznoptics.com/images/Corn.jpg)
http://www.aznoptics.com/index.php?m...products_id=78
#336
SPONSOR/MBworld Guru
Thread Starter
As you all know, AZN Optics is always looking out for new innovations and designs in the market to bring you the best option available for your w204. We've just released a spin off our older V2 model which we're calling V2.5. This design incorporates a capacitor to help regulate power as well as a physical cut PCB to help reduce heat transfer to more delicate diode components. Few other component improvements as well.
![](http://www.aznoptics.com/images/194v2.5.JPG)
To fit all the extra components however, we had to extend the length of the PCB to 33mm which makes it slightly too long for rear plates and interior front domes, so for those interested in those two positions, we'd recommend sticking with our V3s.
To fit all the extra components however, we had to extend the length of the PCB to 33mm which makes it slightly too long for rear plates and interior front domes, so for those interested in those two positions, we'd recommend sticking with our V3s.
#339
Junior Member
Join Date: Oct 2013
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
2009 C300 Sport,2010 E350 P2
Would also will like if possible a quote for a complete redo with the latest newer style LED's interior/exterior for my 2009 C300 Sport Sedan. Please PM when possible. Shipping would be to 00646. Thanks.
Last edited by juanrace2004; 11-15-2013 at 06:10 PM.
#342
Junior Member
Join Date: Oct 2013
Location: US
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
2013 C250 Sport
I just bought some HIDs and had them installed. They don't turn on in the mornings until I restart the car. Everything looks connected securely. And knowledge of what's going on?
#343
SPONSOR/MBworld Guru
Thread Starter
I'd try replugging the unit unit to make sure you do have a good contact. This is one of the the headlights or both?
#346
SPONSOR/MBworld Guru
Thread Starter
Reverse are much brighter, brakes are a bit brighter because it's restricted by the red housing.
#348
SPONSOR/MBworld Guru
Thread Starter
#349
Junior Member
Just finished installing the updated model of the wedge lights in my side markers and eyebrows. New lights are miles ahead of the old model in terms of brightness and they also eliminated the flickering problem that i was having with the old ones. very pleased with results!
#350
Super Member
AZN Optics:
In regards to interior lighting for the W204...when installing LEDs....I assume you loose the auto dimming feature right? Ex: When closing the door, the interior lights will gradually dim to off instead of a turning off immediately. True?
In regards to interior lighting for the W204...when installing LEDs....I assume you loose the auto dimming feature right? Ex: When closing the door, the interior lights will gradually dim to off instead of a turning off immediately. True?