benzo-boi

Hi guys,

I'm looking to buy a set of 19x8.5 / 19x10 HRE 441R wheels....BUT they are 5x120, which is made for a BMW 3 Series. These wheels are hard to come by in 5x112.



Anyone know if the 19x10 will fit? I'm also thinking about getting some hub/wheel centric bolt pattern adapters to convert 5x120 to 5x112. Anyone used these bolt pattern adapters before? I figured I can use this as a spacer and a bolt pattern adapter.

See below:

silversx

whats the offset .. if bmw offset must be pretty low.. which you won't be able to fit.. then you add adapters.. will fit good if you get lifting springs

Matt_Eurojerks

It all depends on the offset of of the wheels. Adapters need to be pretty thick ~15-25mm to be able to have the bolt on the rotor to be flush with the adapter. Now combine that with a 10in wheel in the rear, I see a huge poke issue.

itsLoonie

Judging by the lip sizes on those wheels, the offsets look low already. Does not look like it is going to fit even if it was 5x112. It is not going to fit with the adapters.

benzo-boi

The offsets are:

FRONT: 30
REAR: 36

Matt_Eurojerks

Forget about it.

pnoyworx

how much are the wheels are your buying. I have a 3series that needs shoes.

mangoango

iTrader: (1)

You could pay HRE to rebuild the wheels with smaller lips. But if you have to run them with adapters, they probably still wouldn't fit.

It would be easier to buy a used BMW that fits the wheels.