C250 Intercooler Upgrade
10-25-2012, 03:23 PM
#1
Former Vendor of MBWorld
Thread Starter
C250 Intercooler Upgrade
We just finished the prototyping of the RADO C250 Intercooler Upgrade. This intercooler upgrade is a direct bolt on unit that does NOT require any cutting or fabrication and you will not need to drill any new holes cut away any of your stock components. It is a well thought out kit that comes with everything that you need to bolt it on your car with basic hand tools and it comes with everything you will need for a simple bolt on installation.
We have not figured out pricing yet but the prototypes were a lot of work. We spent a lot of time in the fabrication room on the lathe, the mill, the bending brake and welding to make this kit. We are going to the SEMA show with one on our car and another unit will be display in our booth (booth #24524) so make sure you stop by if you will be at the show. As soon as we get back from the show we will be looking into production costs and we should have a release date and pricing shortly after we get back from the SEMA show. I will post pictures as soon as we have them available.
We have not figured out pricing yet but the prototypes were a lot of work. We spent a lot of time in the fabrication room on the lathe, the mill, the bending brake and welding to make this kit. We are going to the SEMA show with one on our car and another unit will be display in our booth (booth #24524) so make sure you stop by if you will be at the show. As soon as we get back from the show we will be looking into production costs and we should have a release date and pricing shortly after we get back from the SEMA show. I will post pictures as soon as we have them available.
11-27-2012, 08:52 PM
#5
Former Vendor of MBWorld
Thread Starter
