Becker nav
05-17-2013, 07:38 AM
#1
Member
Thread Starter
Join Date: Apr 2013
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
2013 C250 Sport
Becker nav
So my 2013 c250 has the becker navigation module in the glove box, but I can't figure out how to remove it. It doesnt have a tab you press to release it like the manual shows, so I'm wondering if anyone else has come across this and knows how to get it out. I didn't want to start pulling it like heman out of there.
05-17-2013, 08:03 AM
#2
MBWorld Fanatic!
There is a 1" tab in the middle towards the top- Push it in and then pull the unit out. Our units are installed upside down compared to the manual.
Last edited by AkaSigFreak; 05-17-2013 at 08:22 AM.
05-25-2013, 10:55 AM
#3
Member
Thread Starter
Join Date: Apr 2013
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
2013 C250 Sport
There is a 1" tab in the middle towards the top- Push it in and then pull the unit out. Our units are installed upside down compared to the manual.
http://youtu.be/nmRGKBwQkn4
http://youtu.be/nmRGKBwQkn4
05-25-2013, 11:01 AM
#4
MBWorld Fanatic!
Is it possible they mounted it sideways? In the Coupe- I can see the cutouts in the black liner where the connectors are. If the holes are on the side of of the glovebox- the button is on the opposite side of the connector.
05-25-2013, 11:49 AM
#5
Member
Thread Starter
Join Date: Apr 2013
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
2013 C250 Sport
05-25-2013, 03:05 PM
#6
MBWorld Fanatic!
Looks like it is broken. Even the instructions on the Becker site show installation and removal like I showed. Try sliding an old credit card in to the slot or maybe a plastic knife gently into the slot to hit the release.
I haven't tried this alternative but its worth a try unless you want to take it to the dealership.
I haven't tried this alternative but its worth a try unless you want to take it to the dealership.
