2 years of modding my car and im done...
#51
So you recommend getting size small curtains from junction produce? I wanna drop as low as you but they don't make affordable coils for 4matics! Very good looking car though.
#52
Senior Member
Thread Starter
it used too...it was very annoying then i checked it and my locking key was loose so i tightened it hard and the noise was 100% gone and yes its an independent suspension setup
yeah i would reccomend getting size small forsure...however curtains look nice on the outside looking in but the way our w204 doors are setup its not a clean fit from the inside...so i just sold mine... so kinda in a way i dont recommend curtains at all haha.
#53
Member
Really now? I checked it all and it all seems tight to me, but this it started rattling once i changed the stiffness around. Did u ever change your stiffness around?
#54
Senior Member
Thread Starter
#58
Senior Member
Thread Starter
thank you everyone! its been a while since i posted on this thread but
recently dropped the rear of my car more!
oh and its also a 225/35/18 tire on the rear so very low pro
18'' CCW lm20's static tire tucking haha....i know alot of members on this forum has a set of coilovers that dont go low enough...especially with the rear! hmu if you need any help! camera phone picture haha
#60
Senior Member
Thread Starter
hmmm im going to assume you mean that your lug nuts dont fit. yeah mine are lug nuts...but on our cars we cant use lug nuts we use lug bolts so your gonna need a conversion studs. my lug nuts are a 19 wheel lock
#61
Eurojdmbenzo. If I was to stay with the lug bolt wat size I mean the length to get? For the conversion stud is it better? I read where once in a while u have to double check them or maybe I'm wrong. Ur the one wit the conversion and know better. I'm so new to this Mercedes forum coming from g35 coupe. Saw ur page and I knew I wanted something like urs but not too crazy on the suspension cause where I'm at it's not worth it in mass.
#63
Senior Member
Thread Starter
yeah i do and im running spacers so i have longer studs and lug bolts
give ringer racing a call and they can answer all your questions on the product you should buy
http://www.ringer-racing.com/
thats where i got mine
#70
Member
Join Date: Dec 2013
Location: Bellevue, WA
Posts: 203
Likes: 0
Received 0 Likes
on
0 Posts
'08 C350 Sport
Very nice ride. I got the idea of wrapping front bumper black in the middle section of the lip from yours (thanks!) Didn't work out so well for me though :\ I wrapped it with matte black on my steel grey metallic haha. Not much different and really hard to see the black section. I should have left it as is or pick a better color.
You wrapped yours with glossy black?
You wrapped yours with glossy black?
#71
Senior Member
Thread Starter
Very nice ride. I got the idea of wrapping front bumper black in the middle section of the lip from yours (thanks!) Didn't work out so well for me though :\ I wrapped it with matte black on my steel grey metallic haha. Not much different and really hard to see the black section. I should have left it as is or pick a better color.
You wrapped yours with glossy black?
You wrapped yours with glossy black?
i wrapped mine in gloss black but i dont think wrapping it is a good idea cause the vinyl doesnt really hold on the edges......but if you plastidipped it that would be the best bet!
#72
Newbie
Join Date: Jun 2013
Location: Southern California
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
09' c300
Hey man, NICE c!! I rarely post on this forum but i really like your set up! haha. i'm in socal as well (949) O: I rarely see modded c classes and my friends aren't big on modding cars haha
#74
Senior Member
Thread Starter
HELLO mbworld!!
so its been a while since ive refreshed my build thread....but im currently on air suspension and i got new wheels ^__^
i still have megan coilovers but im running UAS bags on my coilovers with custom plates
and accuair switchspeed air management
driving around super low static was kind of a hassle so now im happy to be able to have clearance on air suspension...
and my ccw's had alot of oxidation/scratches/curb/cracks on the inner barrel i fixed alot of it and i was pretty happy to sell it lol
picked up one of my favorite wheels ever!
a set of Leon Hardiritt Ordens
18x8.5+26
18x10+16
some pretty agressive specs on the w204
but here is the way she sits now
so its been a while since ive refreshed my build thread....but im currently on air suspension and i got new wheels ^__^
i still have megan coilovers but im running UAS bags on my coilovers with custom plates
and accuair switchspeed air management
driving around super low static was kind of a hassle so now im happy to be able to have clearance on air suspension...
and my ccw's had alot of oxidation/scratches/curb/cracks on the inner barrel i fixed alot of it and i was pretty happy to sell it lol
picked up one of my favorite wheels ever!
a set of Leon Hardiritt Ordens
18x8.5+26
18x10+16
some pretty agressive specs on the w204
but here is the way she sits now
Last edited by EuroJDMBenzo; 08-04-2014 at 05:14 PM.