SPACERs QUESTION
05-15-2014, 09:06 PM
#1
Member
Thread Starter
Join Date: Jan 2014
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
C300
I have 225/40/zr18 front and rear. gonna have a 1.5 inch drop in the front and 1.2 inch in the back wondering what spacer pads I could use in the back to make it a bit wider looking to match the drop. Suggestions would be be great.
Last edited by MBc300elvis; 05-15-2014 at 09:21 PM.
05-15-2014, 10:28 PM
#2
MBWorld Fanatic!
Join Date: Mar 2006
Location: Hong Kong
Posts: 1,375
Likes: 0
Received 16 Likes
on
15 Posts
2010 C200 CGI
I'm running 18x8.5 on 225/40/18 all around, dropped on H&R Super Sports, +33 (+45 wheel plus 12mm spacer) front and +35 (+45 wheel plus 10mm spacer) rear, no rubbing. ****, I should make this my sig since this topic comes up about once a week.
05-16-2014, 07:37 AM
#3
Member
Thread Starter
Join Date: Jan 2014
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
C300
Not really familiar with the +++ thing
Last edited by MBc300elvis; 05-16-2014 at 12:24 PM.
05-18-2014, 09:39 PM
#5
Member
Thread Starter
Join Date: Jan 2014
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
C300
:beauty:: I'll try those then. i don't know if my 225's are gonna look with 10 in the back but we'll see thanks .if anyone is had more pictures with 225's and spacers please post
05-19-2014, 08:28 AM
#7
Member
Thread Starter
Join Date: Jan 2014
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
C300
Trending Topics
05-21-2014, 01:41 PM
#10
Member
Join Date: Jul 2013
Location: Oviedo, Fl./ Las Vegas
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
mercedes c250, 08 vette blown with meth (680 rwhp)
05-24-2014, 04:49 PM
#11
Member
Thread Starter
Join Date: Jan 2014
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
C300
05-24-2014, 05:14 PM
#12
Member
Join Date: Jul 2013
Location: Oviedo, Fl./ Las Vegas
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
mercedes c250, 08 vette blown with meth (680 rwhp)
05-24-2014, 05:18 PM
#13
Member
Join Date: Jul 2013
Location: Oviedo, Fl./ Las Vegas
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
mercedes c250, 08 vette blown with meth (680 rwhp)
get a set of Digital Calipers, place them on the edge of the rim and measure out towards the fender well . Mine measured 15 mm til it hits, so I went with 12mm in the rear
05-24-2014, 05:35 PM
#14
Member
Thread Starter
Join Date: Jan 2014
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
C300
