Need help finding wheel bearings for C300
#1
Junior Member
Thread Starter
Join Date: Dec 2014
Location: West Palm Beach, FL
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
C300 '08 Sport sedan
Need help finding wheel bearings for C300
Hi all,
My C300 sport '08 rear wheel drive is having bad rear bearing on both sides.
It is making noise and they need to be replaced. I got a quote for my mechanic for
$320 for parts and $750 for labor part.. Is that normal?
I was doing some research and then i only came across front wheel bearings only. If anyone can tell me where to order rear wheel bearings or give me part number. I would appreciate it.
Thanks!!
My C300 sport '08 rear wheel drive is having bad rear bearing on both sides.
It is making noise and they need to be replaced. I got a quote for my mechanic for
$320 for parts and $750 for labor part.. Is that normal?
I was doing some research and then i only came across front wheel bearings only. If anyone can tell me where to order rear wheel bearings or give me part number. I would appreciate it.
Thanks!!
#3
Junior Member
Thread Starter
Join Date: Dec 2014
Location: West Palm Beach, FL
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
C300 '08 Sport sedan
Thank you! I found a pair sold on eBay for around $175. It has the same number part you provided. I wonder if anyone here has installed them before.
http://www.ebay.com/itm/151158609121?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT
I have been trying to look for a DIY but no luck..
http://www.ebay.com/itm/151158609121?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT
I have been trying to look for a DIY but no luck..
#4
Out Of Control!!
![](https://mbworld.org/forums/images/ranks/veteran_army.png)
Regret, not a lawn mechanic DIY, spend the 19 bucks and subscribe to Startek WIS put your VIN in and copy all the repair docs--plus you will need the very special tools!!
Your best bet is to go back to the mechanic who quoted the job and try to work out a deal!!
Your best bet is to go back to the mechanic who quoted the job and try to work out a deal!!