Phillips LEDs For Tails, Eyebrows
#1
Super Member
Thread Starter
Phillips LEDs For Tails, Eyebrows
Has anyone tried these LEDS from Phillips?
I presume they can be used for eyebrows.
https://www.amazon.com/Philips-12791...i=desktop&th=1
I presume they can be used for eyebrows.
https://www.amazon.com/Philips-12791...i=desktop&th=1
Last edited by Nicholi2007; 01-24-2017 at 01:04 PM.
#5
Super Member
They will work in a few interior applications and that is it. I have some. Rear headliner lights, front vanity lights, trunk and glove box is where I have them. Canbus needed for the others.
#6
SPONSOR/MBworld Guru
Although interior doesn't require canbus, due to how little power LEDs require to run, without any resistance, any residual line power or current leakage will cause the bulb to light up, even though you have the switch off.
#7
Senior Member
Put them on my car and even though they do light up the error code shows up everytime. Funny thing is the left error message comes on instantly. The right may wait 10 miuntes to show up.
Trending Topics
#9
Super Member
Meant to go into more detail in my first post, but it is possible to get these Philips LEDs working as eyebrow and tail light LEDs. The only problem is that it requires variant coding to do so, which most people don't have access to.
I've been running the 194 LEDs for about 6 months error and flicker free, tail lights (all bulbs except turn signal and reverse) - 4 months, no issue. Was even able to get bulb out error messages to still work correctly
I've been running the 194 LEDs for about 6 months error and flicker free, tail lights (all bulbs except turn signal and reverse) - 4 months, no issue. Was even able to get bulb out error messages to still work correctly
Last edited by Funkwagen; 01-25-2017 at 04:48 PM.
#10
Super Member
Meant to go into more detail in my first post, but it is possible to get these Philips LEDs working as eyebrow and tail light LEDs. The only problem is that it requires variant coding to do so, which most people don't have access to.
I've been running the 194 LEDs for about 6 months error and flicker free for about 6 months, tail lights (all bulbs except turn signal and reverse) - 4 months, no issue. Was even able to get bulb out error messages to still work correctly
I've been running the 194 LEDs for about 6 months error and flicker free for about 6 months, tail lights (all bulbs except turn signal and reverse) - 4 months, no issue. Was even able to get bulb out error messages to still work correctly
Funk, I wish you lived near me. I'd have you tweak my car.
#11
Super Member
#12
Super Member
#13
SPONSOR/MBworld Guru
The following users liked this post:
intrdrgn (01-25-2017)