When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hello, I need help , ILS
I have a w204 c300, i replaced my halogen to Projector Headlights (Intelligent Lights System) the factory model, and unfortunately it is not working, only the C led is working for couple minutes, can we fix it with the decode ? i can give you my VIN.
Thank you,
What have you done so far besides installing the new headlamps?
In order to successfully complete a halogen to factory bi-xenon conversion on your particular W204 you need:
-Set of bi-xenon headlamps with xenon ballasts and LED control units
-Xenon retrofit cable harness
-New front SAM
-Headlamp control unit
-Front level sensor
-Rear level sensor with cable harness
-Dealer to add code 615 (Bi-Xenon Headlamps w/ Active Curve Illumination) to the data card and SCN code the central gateway, instrument cluster, front SAM and headlamp control unit
Last edited by MB_FanAddict; 12-22-2019 at 09:38 PM.
i have tried to change the Front Sam, I putted the Sam of the other car which had the headlights and still not working. Now i putted back my Sam again.
What should i do ?
I guess, for now, you will need to reinstall the original halogen headlamps until you have everything required.
Having the two major items already (front sam and xenon headlamps), you only need a few additional parts to complete the project, so don't give up! I will PM you the write up I put together listing all of the necessary parts and control units that must be coded.
Last edited by MB_FanAddict; 12-23-2019 at 11:40 AM.
12-22-2019, 02:05 PM
