Problem with the first start of the day
#1
Newbie
Thread Starter
Join Date: May 2018
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
mercedes 204 classe c 2007
Problem with the first start of the day
Hello!
I have a mercedes w 204 class c of 2007 and every day the first time I put it to work stays for a few seconds with some difficulty of the engine stabilize. For the rest of the day he picks up normally. I already changed the starter but the problem remains. What could it be?
Thank you
I have a mercedes w 204 class c of 2007 and every day the first time I put it to work stays for a few seconds with some difficulty of the engine stabilize. For the rest of the day he picks up normally. I already changed the starter but the problem remains. What could it be?
Thank you
The following users liked this post:
Joaquim Mariano (05-19-2018)
#5
Newbie
Join Date: May 2018
Posts: 2
Received 0 Likes
on
0 Posts
Mercedes class C 220 W204 2007 diesel
Hello!
The glowplugs do not have any problem once a test was done by an electrician.
When I turn on the ObdII the following error codes appear:
U102700
U118100
d41e00
9DD013
Will any of these codes cause the bad start the first time of the day?
Thanks a lot for the help
The glowplugs do not have any problem once a test was done by an electrician.
When I turn on the ObdII the following error codes appear:
U102700
U118100
d41e00
9DD013
Will any of these codes cause the bad start the first time of the day?
Thanks a lot for the help
#6
Senior Member
The first two are to do with the chassis CAN Bus.
Are you using a Mercedes OBD reader as I can find nothing about the other codes.
Best practice is to clear all the codes then drive the car and see which return,
Are you using a Mercedes OBD reader as I can find nothing about the other codes.
Best practice is to clear all the codes then drive the car and see which return,