Quick question about wheels
#1
MBWorld Fanatic!
Thread Starter
Quick question about wheels
Hey guys on my wife's '12 C300 i have 17's but the tires are due to be changed so i wanted to upgrade to 18's i found a nice set of wheels with tires but just had a quick question about fitment, The car is 12 C300 4-Matic and the wheels are 18x8.5" all around ET38 with a 235/40 tire size, i know the rear should be good just wondering if the fitment will be flush in front or will it poke a bit
Thanks
Andre
Thanks
Andre
#2
MBWorld Fanatic!
Check the diameter of your present front tires and compare to the ones you want to fit. There's only about 5 mm clearance beneath the spring perch to the tire tread (stick your finger in there and you'll see), so that's your critical dimension.
#3
MBWorld Fanatic!
Thread Starter
#4
Junior Member
Poking out is not your main concern with these setup but rubbing is. It will rub on front with compressed springs and also it will poke out slightly.
I had 235/35/19 with 8,0 - et45 on front and rubbed slightly on hard turns and with springs fully compressed with wheels turned. Compared to mine , your front wheels will poke out 0,5 inch more and your tyre diameter is 0,2 inch bigger.
I had 235/35/19 with 8,0 - et45 on front and rubbed slightly on hard turns and with springs fully compressed with wheels turned. Compared to mine , your front wheels will poke out 0,5 inch more and your tyre diameter is 0,2 inch bigger.
Trending Topics
#9
MBWorld Fanatic!
Thread Starter
With 4 people in the car it will slightly rub on dips, so im raising the rear this weekend a bit i think it should do the trick