UK 2008 W204 C180K Estate Rear Side Seat Restraints?!
#1
Newbie
Thread Starter
Join Date: Aug 2019
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
C180 Kompressor 2008 Right Hand Drive
UK 2008 W204 C180K Estate Rear Side Seat Restraints?!
Hi, I need help - I am trying to replace the rear side seat belts in my UK 2008 W204 C180K Estate and I just can't figure out how to get to the fixings :-(
Have removed all the trim and just can't see what hold it into its cradle on each side for removal to take place. I am faced with a metal frame and no way that I can see of getting in.
What's the clue guys am stuck. Have searched for videos and diagrams online but there is nothing. Hope anyone can help me.
Have removed all the trim and just can't see what hold it into its cradle on each side for removal to take place. I am faced with a metal frame and no way that I can see of getting in.
What's the clue guys am stuck. Have searched for videos and diagrams online but there is nothing. Hope anyone can help me.
#2
MBWorld Fanatic!
I am not sure how different your car is from a 2013 C220 (W204). I've removed the rear left seat belt.
Follow the attached instructions to remove the C-pillar trim.
Seat belt mechanism is held with one thick bolt behind the c-pillar trim.
Follow the attached instructions to remove the C-pillar trim.
Seat belt mechanism is held with one thick bolt behind the c-pillar trim.
#3
Newbie
Thread Starter
Join Date: Aug 2019
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
C180 Kompressor 2008 Right Hand Drive
Hi yes thanks for that, I have used that to remove the trim, the problem I am having is once I have it all exposed, and I am not sure if its different for the estate model, I can't get to the actual belt/restraint assembly. Its kinda in its own frame and I can't work out what bit moves to allow access - there's obviously a bolt or something somewhere but just can't work it out :-(
Any ideas, driving me crazy.
Any ideas, driving me crazy.
Last edited by Gary Bush; 08-05-2019 at 03:17 PM.
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)