W204 Parktronic issue
#1
W204 Parktronic issue
Hello everyone. I had a little accident with my W204 C180 2010. The rear bumper got crashed. I found another one in a scrap yard but it was from c350 2012 (facelift). The bumper fits like a glove but the Parktronic connection is different from the one inside the boot. I was thinking to get a new set of cables from the old model, but not sure it will be compatible with the facelift sensors. Any help, please? Thanks.
#2
Senior Member
Joined: Oct 2019
Posts: 277
Likes: 73
From: Perth Australia
12 C200, 12 C180, 10 Fuso Warrior crew cab, 08 RTV ute, 05 Smart Fortwo cabrio, 09 Smart Fortwo
From my dealings with the sensors the W204 ones are all the same, just use the harness from your old bumper, I would keep some sensors off your old bumper as spares too along with the little silicone seals that are on them, very handy when trying to find a sensor fault.
#3
question
Hello everyone. I had a little accident with my W204 C180 2010. The rear bumper got crashed. I found another one in a scrap yard but it was from c350 2012 (facelift). The bumper fits like a glove but the Parktronic connection is different from the one inside the boot. I was thinking to get a new set of cables from the old model, but not sure it will be compatible with the facelift sensors. Any help, please? Thanks.
Hi
I own a pre-facelift 2011 c class equipped with parktronic, and wanted to upgrade to the facelifted rear bumper, was it complicated process to match the cables so they could connect? let me know
Hi
I own a pre-facelift 2011 c class equipped with parktronic, and wanted to upgrade to the facelifted rear bumper, was it complicated process to match the cables so they could connect? let me know
#4
Senior Member
Joined: Oct 2019
Posts: 277
Likes: 73
From: Perth Australia
12 C200, 12 C180, 10 Fuso Warrior crew cab, 08 RTV ute, 05 Smart Fortwo cabrio, 09 Smart Fortwo
If your car is already fitted with parktronic all you have to do is unclip your wiring from your old bumper, remove the wiring from the new bumper then clip the old bumper wiring to your new bumper, that way your plug will match your car.
#5
Thank you for the response, does this forsure work with the existing sensors on the bumper? I feel like its too good to be true! Im assuming by now OP has figured this out too
#6
Senior Member
Joined: Oct 2019
Posts: 277
Likes: 73
From: Perth Australia
12 C200, 12 C180, 10 Fuso Warrior crew cab, 08 RTV ute, 05 Smart Fortwo cabrio, 09 Smart Fortwo
I have both here, early w204 and facelift w204 both bumpers use the same sensors its just the plug that is different on the wiring.
#7
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)