CAMSHAFT Magnetic & errors 0705 0606
Thread Starter
Newbie
Joined: Jul 2020
Posts: 4
Likes: 0
C250 2012
CAMSHAFT Magnetic & errors 0705 0606
Hello,
I'm new here so excuse me if i missed any step before adding this subject. My car is C250 2012 4 Cyl not AMG with 65k KM.
2 weeks ago i was driving then at a time pressed the gas pedal for kick-down and surprised with little delay to interact with shaking for 2 seconds then it goes and run with speed. i thought it's some dirt in fuel or maybe fuel pump because nothing wrong until i back to home.
However, after few hours i was going out again and once turn engine on the check engine (CEL) come on. next day i visited a Mercedes mechanic and he said it's fault in CAMSHAFT MAGNETIC SENSOR so need to be replaced. after changing both of them car was running smoothly and CEL gone also gear shifting is normal. then CEL come on again with normal drive not any aggressive speed. So i return to him and he diagnose it and find error 2805, 0705 & 0606 that belongs to transmission conductor plate
also i visited another one for double check and it's same error he re-program it and CEL gone but sure back on again on next drive with speed 125 i think it's on 7th gear but still shifting is ok.
Now, please advise is it normal to face this issues with this little KM usage? Also, is it maybe belongs to any wrong way the CAMSHAFT Magnetic sensor linked or whats the problem please.
FYI, i'm 2nd owner since 45KM and never faced any problem with the car or transmission and shifting still normal around 2 to 2.5 RPM even with CEL on. Thanks in advance i appreciate your help or ideas.
I'm new here so excuse me if i missed any step before adding this subject. My car is C250 2012 4 Cyl not AMG with 65k KM.
2 weeks ago i was driving then at a time pressed the gas pedal for kick-down and surprised with little delay to interact with shaking for 2 seconds then it goes and run with speed. i thought it's some dirt in fuel or maybe fuel pump because nothing wrong until i back to home.
However, after few hours i was going out again and once turn engine on the check engine (CEL) come on. next day i visited a Mercedes mechanic and he said it's fault in CAMSHAFT MAGNETIC SENSOR so need to be replaced. after changing both of them car was running smoothly and CEL gone also gear shifting is normal. then CEL come on again with normal drive not any aggressive speed. So i return to him and he diagnose it and find error 2805, 0705 & 0606 that belongs to transmission conductor plate
also i visited another one for double check and it's same error he re-program it and CEL gone but sure back on again on next drive with speed 125 i think it's on 7th gear but still shifting is ok.Now, please advise is it normal to face this issues with this little KM usage? Also, is it maybe belongs to any wrong way the CAMSHAFT Magnetic sensor linked or whats the problem please.
FYI, i'm 2nd owner since 45KM and never faced any problem with the car or transmission and shifting still normal around 2 to 2.5 RPM even with CEL on. Thanks in advance i appreciate your help or ideas.
