Oil Filter Location
#1
Senior Member
Thread Starter
Join Date: Feb 2015
Location: S. Ca.
Posts: 393
Likes: 0
Received 22 Likes
on
16 Posts
2015 C300, 2015 F-350 Platinum, 1969 Mach 1 428cj, 2007 Roadking
Oil Filter Location
Haven't had time to put our new C300 with turbo I4 on the rack yet. Can anyone tell me the location of the filter and wether it's a cartridge or cannister type of filter. Any info would be appreciated. Also does it require any type of special tools?
#3
Senior Member
Thread Starter
Join Date: Feb 2015
Location: S. Ca.
Posts: 393
Likes: 0
Received 22 Likes
on
16 Posts
2015 C300, 2015 F-350 Platinum, 1969 Mach 1 428cj, 2007 Roadking
Is that the cast looking cap thats at an app. 45 degree angle? If so it looks like it might create a mess. Around here it appears that it is a dealer only part.
#4
MBWorld Fanatic!
![](http://s2.postimg.org/693xag3tl/ampnet_photo_20120620_044383.jpg)
photo hosting
No special tools needed, loosen the lid and lift the assembly slightly up and let the oil drain into the oil filter housing, after a couple of minutes you can lift it without too much spillage.
#5
Senior Member
Thread Starter
Join Date: Feb 2015
Location: S. Ca.
Posts: 393
Likes: 0
Received 22 Likes
on
16 Posts
2015 C300, 2015 F-350 Platinum, 1969 Mach 1 428cj, 2007 Roadking
Thanks alot for the info and pic. There's quite a bit of diff. in the under hood layout between the ones supplied here and yours but the engine appears to be identical. Even the engine cover is diff. on ours. You have to remove the cover to see the filter.