Resetting ECU
04-25-2016, 08:50 PM
#3
Junior Member
Thread Starter
Join Date: Mar 2016
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
C250
04-25-2016, 08:54 PM
#4
Super Member
You can clear the codes from the Quick Test screen or individually within the module. Run the quick test on all modules and then use the "Clear Fault Memory" button at the bottom of that screen. Within the module, look under the "Error Codes/Events" tab and then use the same button
Last edited by DBOC205; 04-25-2016 at 08:59 PM.
