retrofit rotating tweeters (burmester copy)
#1
Member
Thread Starter
Join Date: May 2018
Location: Denmark
Posts: 193
Likes: 0
Received 26 Likes
on
18 Posts
C220D W205 Estate
retrofit rotating tweeters (burmester copy)
If my car is not equipped with tweeters, will I be able to connect these?
are the the needed plugs already avaliable in my car?
http://s.aliexpress.com/Fv6rAjey
are the the needed plugs already avaliable in my car?
http://s.aliexpress.com/Fv6rAjey
#3
MBWorld Fanatic!
I think you will have to run power leads to each tweeter off headunit pin connector - ask the vendor how to install BEFORE you commit to these - taken from E/S Class upgraded 3D Burmester design - also you need audio crossovers for any added tweeter.
Your current triangles you can add/insert tweeters - and you can get metal (not plastic) China grilles - for a lot less - and yes - the wiring connections for the speakers and crossovers for that can be done in the door panel.
Your current triangles you can add/insert tweeters - and you can get metal (not plastic) China grilles - for a lot less - and yes - the wiring connections for the speakers and crossovers for that can be done in the door panel.
#4
MBWorld Fanatic!
Join Date: Nov 2003
Location: Earth
Posts: 2,210
Received 449 Likes
on
345 Posts
2015 C300 4Matic Sport
If my car is not equipped with tweeters, will I be able to connect these?
are the the needed plugs already avaliable in my car?
http://s.aliexpress.com/Fv6rAjey
are the the needed plugs already avaliable in my car?
http://s.aliexpress.com/Fv6rAjey
Trending Topics
#10
Member
#18
MBWorld Fanatic!
Join Date: Nov 2003
Location: Earth
Posts: 2,210
Received 449 Likes
on
345 Posts
2015 C300 4Matic Sport
1. Disconnect #6 connector from door controller and plug it into the harness, then plug the harness into #6 port.
2. Disconnect tweeter 2 pin cable, plug into Y harness cable to new 3d tweeter.
3. Spend 5 hours trying to put left door panel back on with speaker installed. (realize your mistake)
4. Spend only 40 minutes on entire right door speaker install.
Last edited by benzdude; 11-16-2018 at 02:13 PM.
#19
MBWorld Fanatic!
Join Date: Nov 2003
Location: Earth
Posts: 2,210
Received 449 Likes
on
345 Posts
2015 C300 4Matic Sport
Looks like there is also a mid speaker cover illumination kit. (taps into the same #6 connector)
https://www.ebay.com/itm/Mercedes-GL...r/223193738670
https://www.ebay.com/itm/Mercedes-GL...r/223193738670
#20
Member
Thread Starter
Join Date: May 2018
Location: Denmark
Posts: 193
Likes: 0
Received 26 Likes
on
18 Posts
C220D W205 Estate
it's plug and play.
1. Disconnect #6 connector from door controller and plug it into the harness, then plug the harness into #6 port.
2. Disconnect tweeter 2 pin cable, plug into Y harness cable to new 3d tweeter.
3. Spend 5 hours trying to put left door panel back on with speaker installed. (realize your mistake)
4. Spend only 40 minutes on entire right door speaker install.
1. Disconnect #6 connector from door controller and plug it into the harness, then plug the harness into #6 port.
2. Disconnect tweeter 2 pin cable, plug into Y harness cable to new 3d tweeter.
3. Spend 5 hours trying to put left door panel back on with speaker installed. (realize your mistake)
4. Spend only 40 minutes on entire right door speaker install.
Behind my covers there is nothing.
But very interesting. Looking good
#21
MBWorld Fanatic!
Join Date: Nov 2003
Location: Earth
Posts: 2,210
Received 449 Likes
on
345 Posts
2015 C300 4Matic Sport
No tweeters? I thought even standard audio included tweeters.
Last edited by benzdude; 11-21-2018 at 01:37 PM.
#23
#24
MBWorld Fanatic!
Join Date: Nov 2003
Location: Earth
Posts: 2,210
Received 449 Likes
on
345 Posts
2015 C300 4Matic Sport
I am now beginning to hear all the burmester speaker vibration noises that people have been complaining about at certain frequencies
i will have some work to do in the summer.
The following users liked this post:
MBSebas87 (12-31-2018)