Hello people, I just found out that this air vent is pretty cool for our car. However, I concern how to install them into our w205 and how to plug the harness wire together?
Cosworth2000
MBWorld Fanatic!
close
- Join DateJun 2012
- LocationToronto
- Posts:1,229
-
iTrader Positive Feedback0
-
iTrader Feedback Score(0)
- Vehicle(s) I drive2022 E53 AMG
-
Likes:111
-
Liked:188 Times in 159 Posts
I believe there is a video on Youtube that you can look up.
Senior Member
Installation isn't hard. I pulled my console to vinyl wrap it, but for the life of me I'm not sure where those would plug in. There's a tutorial somewhere on this site for pulling the console apart.
Unlike the 2016 model, the 2017 model has ambient light on the center console, so would you need to power it from the fuse box? or can you just splice the power wire into the center console light wires?
Newbie
I went ahead and ordered ambient lighting retrofit (door trim/center console). The local MB shop is going to install the lights and add the coding. Would the install void warranty? I presume that in the worst-case, the installation is reversible.
Cosworth2000
MBWorld Fanatic!
close
- Join DateJun 2012
- LocationToronto
- Posts:1,229
-
iTrader Positive Feedback0
-
iTrader Feedback Score(0)
- Vehicle(s) I drive2022 E53 AMG
-
Likes:111
-
Liked:188 Times in 159 Posts
The only thing that you will not get is a new battery.
MaverickC43
MBWorld Fanatic!
close
- Join DateMay 2021
- LocationPlainfield IL
- Posts:1,317
-
iTrader Positive Feedback0
-
iTrader Feedback Score(0)
- Vehicle(s) I driveAmg C43
-
Likes:210
-
Liked:200 Times in 177 Posts
I know this is an old thread.
but how long was the install for these vents?
tia
but how long was the install for these vents?
tia
MBWorld Fanatic!
I did it 2 weeks ago.
took me 2 hours in total.
Most time went in getting the cable from the 2 outside vents to the center.
You need good tools to take out the vents though.
Small hooks where you can put some power on
took me 2 hours in total.
Most time went in getting the cable from the 2 outside vents to the center.
You need good tools to take out the vents though.
Small hooks where you can put some power on
benzdude
MBWorld Fanatic!
close
- Join DateNov 2003
- LocationEarth
- Posts:2,404
-
iTrader Positive Feedback0
-
iTrader Feedback Score(0)
- Vehicle(s) I drive2015 C300 4Matic Sport
-
Likes:472
-
Liked:495 Times in 380 Posts
Quote:
took me 2 hours in total.
Most time went in getting the cable from the 2 outside vents to the center.
You need good tools to take out the vents though.
Small hooks where you can put some power on
ITEQ 2 Pcs Mercedes Benz Instrument Cluster Removal Pulling Hooks Tool https://a.co/d/4AKaoQsOriginally Posted by Doa
I did it 2 weeks ago.took me 2 hours in total.
Most time went in getting the cable from the 2 outside vents to the center.
You need good tools to take out the vents though.
Small hooks where you can put some power on









