Project Turbo upgrades
#28
Some update, the car got its first tune and i can only say its AMAZING she was running on Hoosier's A6 and i got ESP blinking all through the second gear, she will be on the dyno tomorrow and fine tuned, all i can say is the potential is high and hopefully tomorrow will post some dyno sheets, plus couple of vids stay tuned this is going to be good.
#29
Out Of Control!!
Some update, the car got its first tune and i can only say its AMAZING she was running on Hoosier's A6 and i got ESP blinking all through the second gear, she will be on the dyno tomorrow and fine tuned, all i can say is the potential is high and hopefully tomorrow will post some dyno sheets, plus couple of vids stay tuned this is going to be good.
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
#32
MBWorld Fanatic!
Join Date: Feb 2004
Location: Southern, CA.
Posts: 9,155
Likes: 0
Received 18 Likes
on
17 Posts
V12-Biturbo
Congratz! Love seeing people doing the impossible (I can only imagine how many told you this was an impossible mod blahblah)
These must be the NEW line from Garrett
Who's tuning her?
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
![nix](https://mbworld.org/forums/images/smilies/nixweiss.gif)
Last edited by Thericker; 03-11-2012 at 08:29 PM.
#33
Just a small history on my car and the dyno runs, my car is a CLS63 with PP, my first dyno was 529whp on the dynojet, after i installed the Brabus piggy back i dynoed at 579.5whp ONCE only the piggy back was not good where i had different readings from 540-579, they then installed another one after fixing it, my car read 550-554 constent. All on the same Dynojet, this is my results with the new upgrade, bare in mind this is the first base tune my car is getting another tune as i am typing this
and will get more once my custom exhaust is ready in two weeks, and someother goodies.
![naughty](https://mbworld.org/forums/images/smilies/naughty.gif)
Last edited by dbasons55; 03-12-2012 at 03:40 AM.
#34
MBWorld Fanatic!
Join Date: Feb 2004
Location: Southern, CA.
Posts: 9,155
Likes: 0
Received 18 Likes
on
17 Posts
V12-Biturbo
Just a small history on my car and the dyno runs, my car is a CLS63 with PP, my first dyno was 529whp on the dynojet, after i installed the Brabus piggy back i dynoed at 579.5whp ONCE only the piggy back was not good where i had different readings from 540-579, they then installed another one after fixing it, my car read 550-554 constent. All on the same Dynojet, this is my results with the new upgrade, bare in mind this is the first base tune my car is getting another tune as i am typing this
and will get more once my custom exhaust is ready in two weeks, and someother goodies.
![naughty](https://mbworld.org/forums/images/smilies/naughty.gif)
![EEK!](https://mbworld.org/forums/images/smilies/eek.gif)
Last edited by Thericker; 03-12-2012 at 03:58 AM.
#35
#36
MBWorld Fanatic!
#38
Super Moderator
Holy crap! Totally subscribed! Wish you the best in this project and can't wait to see how much power we can get out of this motor! ![bow](https://mbworld.org/forums/images/smilies/bowdown.gif)
Someone want to buy my car? I need to get myself into one of these new V8TT ASAP!
![bow](https://mbworld.org/forums/images/smilies/bowdown.gif)
Someone want to buy my car? I need to get myself into one of these new V8TT ASAP!
![wall](https://mbworld.org/forums/images/smilies/banghead.gif)
#40
Senior Member
Join Date: Mar 2008
Posts: 317
Likes: 0
Received 0 Likes
on
0 Posts
2012 E63 PP, 2012 Ferrari 458, 2012 Boxster S
Unreal! 640 WHP equals roughly 780 HP at the crank (assuming 18% drive train loss). You're going to need some serious rubber to put that power down.
Congratulations and well done pushing the envelope on the 5.5 TT platform.
Ken
Congratulations and well done pushing the envelope on the 5.5 TT platform.
Ken
#41
My thanks goes to the guys who made this happen Sebastian my German tuner who is a member but never talks to anyone.
DiGi-Tec Dubai performance they are the best in Dubai and i can back them up with my car.
MTB, Danny is one of the best software tuners out there.
Thanks everyone for the replies, anyone that will run on bigger turbos will be amazed on how quick this thing can be, its just amazing. I am running stock tires and the car still pulls hard from a dead stop, i have a video but its with my friend i will post it as soon as i get it of him.
Here is a video of running the car from 160km-280km
here is another video on youtube of a CLS63 with PP running from 0-290km you can compare by timing both speedometers. Keep in mind i was running at a temperature of 20C where as for the other car he was running at 13C
more videos will be posted i have to get a chance to re-race my GT2 and post a video of a before and after, hopefully i will make that on Thursday or Friday.
DiGi-Tec Dubai performance they are the best in Dubai and i can back them up with my car.
MTB, Danny is one of the best software tuners out there.
Thanks everyone for the replies, anyone that will run on bigger turbos will be amazed on how quick this thing can be, its just amazing. I am running stock tires and the car still pulls hard from a dead stop, i have a video but its with my friend i will post it as soon as i get it of him.
Here is a video of running the car from 160km-280km
here is another video on youtube of a CLS63 with PP running from 0-290km you can compare by timing both speedometers. Keep in mind i was running at a temperature of 20C where as for the other car he was running at 13C
more videos will be posted i have to get a chance to re-race my GT2 and post a video of a before and after, hopefully i will make that on Thursday or Friday.
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
Last edited by dbasons55; 03-13-2012 at 05:23 AM.
#42
Dyno sheet and dyno video in the following link
http://www.facebook.com/DigiTechUAE
More videos will be posted through the link in future please like if u want to be updated
http://www.facebook.com/DigiTechUAE
More videos will be posted through the link in future please like if u want to be updated
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
#45
MBWorld Fanatic!
Join Date: Jul 2010
Location: A Canadian in Dubai, United Arab Emirates
Posts: 4,748
Likes: 0
Received 0 Likes
on
0 Posts
'05 C200K SS, '05 Kleemann CLK500K, '08 Hummer H3 & '92 Z34 5sp (track car in Canada)
Awesome build habibi! I've never visited Digi-Tec, I might stop by and have a look one day.
#48
#49
Senior Member
Join Date: Nov 2004
Location: Florida
Posts: 483
Likes: 0
Received 0 Likes
on
0 Posts
2006 CL65
You're welcome dbason55.
This thread is about your build, so I will let Renntech post their results in another thread.
Congrats again.
Look forward to video of your CLS's runs against the GT2.
Should be interesting.
This thread is about your build, so I will let Renntech post their results in another thread.
Congrats again.
Look forward to video of your CLS's runs against the GT2.
Should be interesting.