What's your recommendation for custom wheel specs?
#1
Thread Starter
Member
Joined: Jul 2018
Posts: 151
Likes: 18
From: Bay Area, CA
CLS63AMG W218 • CM7 Accord • '13 Yamaha R1
What's your recommendation for custom wheel specs?
Hi guys,
I'm in the midst of ordering custom wheels. I'm searched all over the internet and forums and was curious to know what's the most aggressive setup I can fit with just stock fenders with no adjustment on camber. The car will be lowered to the point if has a nice flush fitment.
I'm hoping to run :
-Front: 20x10+25
255/30/20
-Rear 20x11+35
305/25/20
I know this setup works just fine as a few others are running those specs, but what I'm curious to know is what's the lowest offset given the 10" and 11" widths I can run without running into brake caliper clearance?
Any help is greatly appreciate. Thanks!
I'm in the midst of ordering custom wheels. I'm searched all over the internet and forums and was curious to know what's the most aggressive setup I can fit with just stock fenders with no adjustment on camber. The car will be lowered to the point if has a nice flush fitment.
I'm hoping to run :
-Front: 20x10+25
255/30/20
-Rear 20x11+35
305/25/20
I know this setup works just fine as a few others are running those specs, but what I'm curious to know is what's the lowest offset given the 10" and 11" widths I can run without running into brake caliper clearance?
Any help is greatly appreciate. Thanks!
#3
Thread Starter
Member
Joined: Jul 2018
Posts: 151
Likes: 18
From: Bay Area, CA
CLS63AMG W218 • CM7 Accord • '13 Yamaha R1
Hey. I’ve spoken to HRE since I’m looking at a set and what they’ve recommended is not as aggressive.. so I’m curious to see if anyone else has run lower offsets.
Trending Topics
#8
Thread Starter
Member
Joined: Jul 2018
Posts: 151
Likes: 18
From: Bay Area, CA
CLS63AMG W218 • CM7 Accord • '13 Yamaha R1
Hey so I saw the photo. Was it the screenshot about wheel specs?
It gave a range on offsets. Is that the lowest that can fit? Would you mind providing more context. Thanks!
#10
Thread Starter
Member
Joined: Jul 2018
Posts: 151
Likes: 18
From: Bay Area, CA
CLS63AMG W218 • CM7 Accord • '13 Yamaha R1
I appreciate the help and the quick responses. That's definitely a good starting point and from my own research I've learned those recommendations on their site can be pushed further.
#12
Thread Starter
Member
Joined: Jul 2018
Posts: 151
Likes: 18
From: Bay Area, CA
CLS63AMG W218 • CM7 Accord • '13 Yamaha R1
Update. I'm leaning towards pushing 11.5 now in the rear with a 305.
Found that they can fit seen here.
https://wheelsboutique.com/gallery/m...-adv10-0-ts-cs
Found that they can fit seen here.
https://wheelsboutique.com/gallery/m...-adv10-0-ts-cs