Speaker change.. please help
Thread Starter
Super Member
Joined: Sep 2007
Posts: 519
Likes: 0
:)
Speaker change.. please help
My Front "dash" speaker is cracking, and also my rear subwoofer is also making cracking noise. perhaps i blew it. do anyone know what size replacment i need to purchase or will my warranty cover the speaker issues? also how can I get access to the front dask speaker?
I have compare my radio with my other Mercedes benz, and i realized that my audio will not go very loud, and compare with the new E class, my audio sounds very quite. why is that?
Please advise.
I have compare my radio with my other Mercedes benz, and i realized that my audio will not go very loud, and compare with the new E class, my audio sounds very quite. why is that?
Please advise.
Senior Member
Joined: Jun 2006
Posts: 264
Likes: 1
From: CA
2007 CLS 550 and some other MBZ
Like you said the speakers are not loud enough, so it's very unlikely that you blew them. When you look at the rear deck where the subwoofer is, the vibration probably caused that cracking noise because the deck is not one piece. Try playing something with deep bass and hold down the deck to see if it's better. If it is then use something to put on top of the deck separation. Hope that helps.
Thread Starter
Super Member
Joined: Sep 2007
Posts: 519
Likes: 0
:)
Yeah is very strange, but When I crank the sound on my wife E-class, is much louder, both dont have bose.. just the regular system.
and the front making cracking noise all the time, but is hard to get to? do i need to remove the entire dash to get to the front speaker?
I went and got a custom system install in my trunk, 1 JL w-3, custom box, the only thing i need to do now is remove the rear stock subwoofer so it create a port.
and the front making cracking noise all the time, but is hard to get to? do i need to remove the entire dash to get to the front speaker?
I went and got a custom system install in my trunk, 1 JL w-3, custom box, the only thing i need to do now is remove the rear stock subwoofer so it create a port.
