cls55 exhaust
Thread Starter
Junior Member
Joined: Mar 2014
Posts: 15
Likes: 0
mercedes cls55 amg
cls55 exhaust
Am wanting to remove resonators only and replace with stainless pipe. Have called all exhaust shops in my area and none of them stock stainless exhaust pipe. They all say it must be bent with different equipment. Anyway…was wondering if there was a supplier or specialty shop that could make the 3 inch stainless pipe with the correct bends needed to fill area of resonator and connect to twin outlets?? Names and phone numbers please??
Thread Starter
Junior Member
Joined: Mar 2014
Posts: 15
Likes: 0
mercedes cls55 amg
The resonators are located at the rear of the car with the dual exhaust tips coming out of them. The exhaust pipe enters the front of the resonator at an angle. There has to be an angle in the replacement pipe to cause it to go straight out the rear and also some configuration to feed the dual exhaust tips from a single pipe.
