Low beams not working
Thread Starter
Newbie
Joined: Feb 2021
Posts: 10
Likes: 0
2006 cls55 AMG, 2005 e55 AMG
Low beams not working
I have a 2006 CLS55 with the Bi-Xenon headlights.
Both of my low beams do not turn on. I also get an error for "Active Headlamp Control Currently Unavailable". I have tried a few different bulbs but that is not the issue. My fuses look good. My daytime running lights work fine, same with my high beams.
My front SAM module has the following errors:
9003 Component E1e2 (low beam) or the lead has short circuit. Not defined
Any ideas on what the issue might be? Or what I should do for troubleshooting? If it was just one side I would start replacing the Igniter. But since it is on both sides I think those are good ¯\_(ツ)_/¯
Both of my low beams do not turn on. I also get an error for "Active Headlamp Control Currently Unavailable". I have tried a few different bulbs but that is not the issue. My fuses look good. My daytime running lights work fine, same with my high beams.
My front SAM module has the following errors:
9003 Component E1e2 (low beam) or the lead has short circuit. Not defined
Any ideas on what the issue might be? Or what I should do for troubleshooting? If it was just one side I would start replacing the Igniter. But since it is on both sides I think those are good ¯\_(ツ)_/¯
Last edited by Datsun_76; Mar 14, 2021 at 06:07 PM.
MBWorld Fanatic!
Joined: Jun 2020
Posts: 1,177
Likes: 314
2006 CLS55 AMG, 2005 SLK 350 AMG
I have a 2006 CLS55 with the Bi-Xenon headlights.
Both of my low beams do not turn on. I also get an error for "Active Headlamp Control Currently Unavailable". I have tried a few different bulbs but that is not the issue. My fuses look good. My daytime running lights work fine, same with my high beams.
My front SAM module has the following errors:
9003 Component E1e2 (low beam) or the lead has short circuit. Not defined
Any ideas on what the issue might be? Or what I should do for troubleshooting? If it was just one side I would start replacing the Igniter. But since it is on both sides I think those are good ¯\_(ツ)_/¯
Both of my low beams do not turn on. I also get an error for "Active Headlamp Control Currently Unavailable". I have tried a few different bulbs but that is not the issue. My fuses look good. My daytime running lights work fine, same with my high beams.
My front SAM module has the following errors:
9003 Component E1e2 (low beam) or the lead has short circuit. Not defined
Any ideas on what the issue might be? Or what I should do for troubleshooting? If it was just one side I would start replacing the Igniter. But since it is on both sides I think those are good ¯\_(ツ)_/¯
