Problem with error P 0730 and P 2561
Thread Starter
Newbie
Joined: Apr 2022
Posts: 1
Likes: 0
CLS 55AMG
Problem with error P 0730 and P 2561
Hi guys.
I don't know what to do anymore, so I'll ask you for help.
My Mercedes CLS 55 AMG broke down.
It started with a problem with the torque converter flowing.
I bought (repas from a reputable company) types.
The car happened to me for three months and the battery ran out.
I replaced the oil pump seal and simering and also the bushing.
There were errors P 220A + 2508 + 2500 + 2562 in TCM.
There were P 0715 + 0730 errors in the ECM.
I replaced the transmission plate, oil and filter.
There are currently errors P 2561 in the TCM and error P 0730 in the ECM.
The vehicle behaves exactly the same.
After the start at the team, I have performance and strength.
It takes a long time for the second gear to be engaged, and when it engages it is a big blow and at that moment the transmission has an emergency mode.
I've already spent a lot of time on it.
So far, I've replaced a board from two manufacturers.
He cleaned the ultrasonic valves.
Replaced new valve A 1402770435
Reprogrammed EGS52 computer.
I'm currently waiting for a set of all the valves but I'm afraid it won't help.
I will be happy for any advice.
Thank you
I don't know what to do anymore, so I'll ask you for help.
My Mercedes CLS 55 AMG broke down.
It started with a problem with the torque converter flowing.
I bought (repas from a reputable company) types.
The car happened to me for three months and the battery ran out.
I replaced the oil pump seal and simering and also the bushing.
There were errors P 220A + 2508 + 2500 + 2562 in TCM.
There were P 0715 + 0730 errors in the ECM.
I replaced the transmission plate, oil and filter.
There are currently errors P 2561 in the TCM and error P 0730 in the ECM.
The vehicle behaves exactly the same.
After the start at the team, I have performance and strength.
It takes a long time for the second gear to be engaged, and when it engages it is a big blow and at that moment the transmission has an emergency mode.
I've already spent a lot of time on it.
So far, I've replaced a board from two manufacturers.
He cleaned the ultrasonic valves.
Replaced new valve A 1402770435
Reprogrammed EGS52 computer.
I'm currently waiting for a set of all the valves but I'm afraid it won't help.
I will be happy for any advice.
Thank you
