iForged Liars: Don't Do Biz With Them.
06-27-2005, 03:15 PM
#52
Senior Member
Join Date: Mar 2004
Location: Sunny California
Posts: 359
Likes: 0
Received 0 Likes
on
0 Posts
I waited 16 weeks for my 841s, I was frustrated and angry, but Mike did give me free anodized ceramic dome-etched caps and free overnight shipping.
So I'm not complaining
So I'm not complaining
06-27-2005, 03:43 PM
#53
MBWorld Fanatic!
Join Date: Feb 2003
Location: Abingdon, MD
Posts: 2,012
Likes: 0
Received 0 Likes
on
0 Posts
I like the HRE competition series but was disappointed by the wait times I was quoted to get a set. I am going to get a set of "classics" from ccwheel for track use. I know someone who uses and love them...
iForge; I just remember that iForge made a stick about another company copying their copys of HREs, and I just figured as well to stay away from them....
iForge; I just remember that iForge made a stick about another company copying their copys of HREs, and I just figured as well to stay away from them....
06-27-2005, 03:49 PM
#54
Senior Member
Join Date: Mar 2004
Location: Sunny California
Posts: 359
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by nukblazi
I like the HRE competition series but was disappointed by the wait times I was quoted to get a set. I am going to get a set of "classics" from ccwheel for track use. I know someone who uses and love them...
iForge; I just remember that iForge made a stick about another company copying their copys of HREs, and I just figured as well to stay away from them....
iForge; I just remember that iForge made a stick about another company copying their copys of HREs, and I just figured as well to stay away from them....
07-02-2005, 10:49 PM
#55
Super Member
Join Date: Aug 2004
Location: O.C./I.E., CA
Posts: 555
Likes: 0
Received 0 Likes
on
0 Posts
05' MB C-dblenckel
Originally Posted by psk145
my only complaint with the HRE is that the paint is too soft. This weekend I dropped the key to my lug bolt 2" from the wheel, and it dented and "smeared" the paint. Sort of like pushing some caulking thats not quite dry
07-03-2005, 04:36 AM
#58
iForged is a buncha crap. People from ClubLexus have problems with them too. Avoid them by all means.
As for HRE, they are my number one sweet spot. If you got the dough (or the hookup) go for HREs. They will not disappoint, as you can easily tell from all the members with HRE's on their cars.
So guys, I dropped this hammer on my cars hood and it made a dent and the paint is scratched :p
Just messin' with ya bro.
psk145: Did you really order directly through HRE?! You could've saved hundreds of dollars by going through a dealer!
As for HRE, they are my number one sweet spot. If you got the dough (or the hookup) go for HREs. They will not disappoint, as you can easily tell from all the members with HRE's on their cars.
So guys, I dropped this hammer on my cars hood and it made a dent and the paint is scratched :p
Just messin' with ya bro.
psk145: Did you really order directly through HRE?! You could've saved hundreds of dollars by going through a dealer!
07-03-2005, 05:30 AM
#59
Super Member
Join Date: May 2004
Location: Manhattan Beach, Ca
Posts: 518
Likes: 0
Received 0 Likes
on
0 Posts
C219 CLS / W220 † / W211† / W210 E55 † / W210 Brabus † / Hamann 540i † /
Originally Posted by BrabusW203
Don't forget my buddy with the 540 that landed in the hospital with a broken arm, leg, concussion, whiplash etc from a defective rear iForge rim center that had completely flew off the barrel due to faulty rivets~! Poor guy is still in rehab recovering from his injuries.
Untrue, I dont believe that for a second. I have 2 friends that own iForged and are very happy with the quality, but yes they do take WAY WAY to long to make the wheels and moderate customer service. Anyways, I too had a 540 that put me into a wall and the rim was ruined because TIRE PRESSURE was too LOW in the rear, causing the rim to cut through the tire. I bet that is exactly what happened to your friend. Need to watch low profiles. and i'm sorry about your friend, hope he's okay.
07-03-2005, 04:28 PM
#60
MBWorld Fanatic!
Join Date: May 2004
Location: orange county, ca
Posts: 1,654
Likes: 0
Received 0 Likes
on
0 Posts
2006 E55
Originally Posted by ricky.agrawal
psk145: Did you really order directly through HRE?! You could've saved hundreds of dollars by going through a dealer!
07-05-2005, 01:54 PM
#61
MBWorld Founder
Join Date: Nov 2001
Location: SoCal
Posts: 2,593
Likes: 0
Received 0 Likes
on
0 Posts
ones too fast according to CHP!
Originally Posted by Highend
Untrue, I dont believe that for a second. I have 2 friends that own iForged and are very happy with the quality, but yes they do take WAY WAY to long to make the wheels and moderate customer service. Anyways, I too had a 540 that put me into a wall and the rim was ruined because TIRE PRESSURE was too LOW in the rear, causing the rim to cut through the tire. I bet that is exactly what happened to your friend. Need to watch low profiles. and i'm sorry about your friend, hope he's okay.
Thanks,
Brad
07-05-2005, 06:21 PM
#63
Almost a Member!
Join Date: Jun 2005
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by otoupalik
This is all hearsay, so take it as you will. However, I have heard form independent sources that what Brabusw203 stated is 100% accurate. I have heard that the wheel bolts backed out, and the wheel seperated.
Thanks,
Brad
Thanks,
Brad
07-05-2005, 08:52 PM
#67
MBWorld Fanatic!
Join Date: May 2003
Location: Khalifonia.
Posts: 6,799
Likes: 0
Received 1 Like
on
1 Post
4 wheeled car.
Originally Posted by ricky.agrawal
iForged is a buncha crap. People from ClubLexus have problems with them too. Avoid them by all means.
As for HRE, they are my number one sweet spot. If you got the dough (or the hookup) go for HREs. They will not disappoint, as you can easily tell from all the members with HRE's on their cars.
So guys, I dropped this hammer on my cars hood and it made a dent and the paint is scratched :p
Just messin' with ya bro.
psk145: Did you really order directly through HRE?! You could've saved hundreds of dollars by going through a dealer!
As for HRE, they are my number one sweet spot. If you got the dough (or the hookup) go for HREs. They will not disappoint, as you can easily tell from all the members with HRE's on their cars.
So guys, I dropped this hammer on my cars hood and it made a dent and the paint is scratched :p
Just messin' with ya bro.
psk145: Did you really order directly through HRE?! You could've saved hundreds of dollars by going through a dealer!
07-05-2005, 11:33 PM
#69
Originally Posted by The Godfather
This coming from the Indian who never owned a set of IForged, nor HRE, nor....a car?
07-05-2005, 11:37 PM
#70
MBWorld Fanatic!
Join Date: May 2003
Location: Khalifonia.
Posts: 6,799
Likes: 0
Received 1 Like
on
1 Post
4 wheeled car.
Originally Posted by ricky.agrawal
Careful. Lotsa stuff I don't say on this forum for a reason.
Come on, we're no all Cambodians, we know what's up
Lot of hearsay makes baby Jesus cry...
07-05-2005, 11:45 PM
#71
Hahaha. Yeah because I make any dough from what I help sell. I know good reputable vendors for everything I suggest and help offer, it seems the guys that get the bad service have gone through iForged directly and what not.
Whenever people chose iForged, I help them meet dealers that have ordered hundreds if not more sets from iForged, so they have plenty of push. I'm sure you understand man.
And I never said I owned a set of iForged, because that's not all you said
Whenever people chose iForged, I help them meet dealers that have ordered hundreds if not more sets from iForged, so they have plenty of push. I'm sure you understand man.
And I never said I owned a set of iForged, because that's not all you said
07-06-2005, 05:25 PM
#74
MBWorld Founder
Join Date: Nov 2001
Location: SoCal
Posts: 2,593
Likes: 0
Received 0 Likes
on
0 Posts
ones too fast according to CHP!
Originally Posted by psk145
Well, BASF paint is soft and sucks. I actually think powdercoating is a better alternative to painting
Two main issues we have found:
1. Rather the a chip that you can touch up, when the powder coating "chips" large pieces fall off, and there is no way to repair other then re-coating the wheel. I had a set on a car once that had to be coated like 5 times in 2 years.
2. With some wheels (one is the SSR Comp), the heating process in the powder coating method changes something in the structure of the wheel, and softens the wheel. SSR and some other wheel makers have released warnings on this through Tire Rack. I had this happen to me on a track car also.
Thanks,
Brad
07-06-2005, 06:58 PM
#75
Almost a Member!
Join Date: Jun 2005
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
No..BASF and 3M are two of the best paints in the world..thats why they are used on most german vehicles....
powdercoating is the cheap method of getting paint on metals...you spray, then cook the paint on for durability...
So No, powdercoating wheels comes second to using quality paint methods.
powdercoating is the cheap method of getting paint on metals...you spray, then cook the paint on for durability...
So No, powdercoating wheels comes second to using quality paint methods.
